Usupportert nettleser oppdaget

Lenovo Support webside støtter Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+

      Flash BIOS update - ThinkCentre M92z

      Back#ProductName# - Downloads

      Name
      Operating System
      Version
      Released
      Download Now
      Checksum Data
      Windows Bios Setting Tools
      exe
      531.2 KB
      Windows 7 (32-bit)
      Windows 7 (64-bit)
      Windows 8 (32-bit)
      Windows 8 (64-bit)
      Windows Vista (32-Bit)
      Windows Vista (64-Bit)
      Windows XP (32-bit)
      Windows XP (64-bit)
      Windows 8.1 (32-bit)
      Windows 8.1 (64-bit)
      9NKT70A
      6/17/2016

      This package updates the basic input/output system (BIOS) on all ThinkCentre M92z systems.

      BIOS is programming that controls low-level hardware operations, including interactions with diskette drives, hard drives, and the keyboard. The BIOS is stored on a chip. Your computer uses flash BIOS, which can be updated through a program on a flash diskette so that you do not have to replace the BIOS chip to update the BIOS.

      Note:

      1. Make note of any settings you have changed in the BIOS Configuration Utility. These settings may have to be re-entered after updating the BIOS.
      2. Depending on the hardware configuration, some computer running on Windows 8 (64-bit) may require "OS Optimized Defaults" disabling in BIOS.

       

      Supported ThinkCentre

      • ThinkCentre M92z

       

      Supported Operating Systems

      • Windows 7 32bit, 64bit
      • Windows 8 32bit, 64bit
      • Windows 8.1 32bit, 64bit
      • Windows Vista 32bit, 64bit
      • Windows XP 32bit, 64bit

       

      Summary of Changes

      Version 9NKT70A

      • [Important] Update includes security fixes.


      Additional Information

      Please refer to the README file for the following:

      • Installation Instructions
      • Determining Which Version is Installed
      • Complete list of summary of changes
      • Known limitations (if any)

       

      File Version Release Date Description
      9njy69usa.exe 9NKT69A 05-Nov-15 Flash UEFI BIOS update (Flash from operating system version)
      9njy69usa.txt 9NKT69A 05-Nov-15 Installation instructions for Flash UEFI BIOS update (Flash from operating system version)
      9nj969usa.iso 9NKT69A 05-Nov-15 Flash UEFI BIOS update (CD ISO image version)
      9nj969usa.txt 9NKT69A 05-Nov-15 Installation instructions for flash UEFI BIOS update (CD ISO image version)
      9njt69usa.zip 9NKT69A 05-Nov-15 USB Drive UEFI BIOS Flash Package
      9njw69usa.exe 9NKT69A 05-Nov-15 Windows BIOS Setting Tool

       

      Command Line Flashing Parameters

      Option 1: DOS Flash Program Options

      The default operation of the flash update program is a step by step dialogue with the user that presents choices and gathers responses from the user about which choices are desired.

      In some situations (such as a large enterprise with many systems that need updating), it may be desirable to create a flash update image that requires no manual intervention to perform an update operation. This can be done by modifying the batch file (autoexec.bat) calling the flash program with the following command:

      flash2.exe [option1] [option2] ... [optionX]

      [OPTIONS]

      /h Show help messages.
      /rsmb Preserve all SMBIOS structures.
      /ncb Program all non-critical blocks
      /clr Clear BIOS settings.
      /ign Ignore BIOS version check.
      /sn:nnnnnnn Update system serial number (up to 20 characters).
      /csn:nnnnnnn Update chassis serial number (up to 20 characters).
      /mtm:nnnnnnn Update machine type and model number (up to 20 characters).
      /tag:nnnnnnn Update system asset tag (up to 25 characters).
      /uuid The flash utility will generate an Universally Unique Identifier (UUID), replacing the one that is currently in the system.
      /logo <filename> Change logo. The size of logo file after compression should be less than 8KB (the size of compressed logo file is displayed on the screen during the processing).
      /cpu Update CPU microcode.
      /reboot Automatic reboot after all requests done.
      /pass:nnnnnnn Input current system password.
      • The following example shows how to update system asset tag number to "1234567" use command line:
        wflash2.exe /tag:1234567
      • The following example shows how to update BIOS and update system asset tag number by one command:
        wflash2.exe bios.rom /tag:1234567
      • The following example shows how to change the power-on logo.
        wflash2.exe /logo:myfav.bmp

      Note: A flash update image using these program options should be tested carefully before widespread usage.

      Option 2: Windows Flash Program Options

      The default operation of the flash update program is to use the graphical user interface provided by the AFUWINGUI program. You can also run the program from a DOS command box (with Administrator privilege) by running "flash.cmd". Before running the "flash.cmd", please change the command line to the options you need. The command is:

      wflash2.exe [option1] [option2] ... [optionX]

      [OPTIONS]

      /h Show help messages.
      /rsmb Preserve all SMBIOS structures.
      /ncb Program all non-critical blocks.
      /clr Clear BIOS settings.
      /ign Ignore BIOS version check.
      /sn:nnnnnnn Update system serial number (up to 20 characters).
      /csn:nnnnnnn Update chassis serial number (up to 20 characters).
      /mtm:nnnnnnn Update machine type and model number (up to 20 characters).
      /tag:nnnnnnn Update system asset tag (up to 25 characters).
      /uuid The flash utility will generate an Universally Unique Identifier (UUID), replacing the one that is currently in the system.
      /logo <filename> Change logo. The size of logo file after compression should be less than 8KB (the size of compressed logo file is displayed on the screen during the processing).
      /cpu Update CPU microcode.
      /reboot Automatic reboot after all requests done.
      /pass:nnnnnnn Input current system password.
      • The following example shows how to update system asset tag number to "1234567" use command line:
        flash2.exe /tag:1234567
      • The following example shows how to update BIOS and update system asset tag number by one command:
        flash2.exe bios.rom /tag:1234567
      • The following example shows how to change the power-on logo.
        flash2.exe /logo:myfav.bmp

      Note: A flash update image using these program options should be tested carefully before widespread usage.


      • Alias ID:
      • Document ID:DS029443
      • Last Updated :17 Jun 2016
      • © 2015 Lenovo