Usupportert nettleser oppdaget

Lenovo Support webside støtter Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+

      How to perform battery gauge reset using Energy Management

      Description

      This article guides you to perform battery gauge reset under Lenovo Energy Management. The illustrations are based on Energy Management 5.0 which may vary from version to version. To learn more, please refer to the Related links at the bottom of this page. Further more, if your system is not with Energy Management installed, instead using OneKey Optimizer, you are recommended to read To calibrate the battery using OneKey Optimizer for more details.

      Applicable Brands

      • All Idea Laptops

      System is configured with

      • Lenovo Energy Management (5.0, 6.0, 7.0, 8.0)

      Solution

      1. Run Energy Management, and click on button showed as below.



      2. Click "Start"



      3. Close all the running programs and processes, connect the computer to the adapter, then click "Next".



      4. Wait until it is finished.

      Note:
      1. Do not cancel while the process is running.
      2. The whole process may take several hours, do not use the computer during calibration process.
      3. Plug in the bundled power adapter, otherwise it will prompt an error message.

      Related Article

      Search

      Var disse opplysningene til hjelp??

      Din feedback hjelper oss å forbedre dette nettstedet..

      • Alias ID: IG20100308-004
      • Document ID: HT069480
      • Last Updated :22 Sep 2016
      • © 2016 Lenovo