Niet ondersteunde browser gevonden

De Lenovo Support wesite ondersteunt Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+

      Symantec Norton Ghost causes system to boot improperly after cloning or hard drive image - ThinkCentre / NetVista

      After cloning or imaging a hard disk drive using Symantec Norton Ghost, the system fails to boot the operating system. This information is provided as a source of reference for those who have cloned or imaged a hard drive which, upon boot, may fail to load the operating system. This anomaly has occurred using Microsoft Windows 2000 and Microsoft Windows 98SE operating systems, but may not be limited to specifically those operating systems.

      Affected configuration
      All Aptiva, NetVista, ThinkCentre, IBM PC, and IntelliStation systems

      The information provided relates to the use of Symantec Norton Ghost as the imaging software. If another imaging software is used, it is recommended that the user contact the manufacturer of that software if this anomaly is experienced.

      If Symantec Norton Ghost is used to clone or image a hard drive and, upon boot, the operating system fails to load from that hard drive enter fdisk /mbr from a DOS prompt. If fdisk /mbr is unsuccessful, refer to Symantec's web site at Refer to these two document titles along with their document ID's for more detailed information: "Ghost compatibility with Windows 2000", Document ID: 2000020908463825; and "Error: "NTLDR is missing" or "INACCESSIBLE BOOT DEVICE on startup after cloning", Document ID 2000112817032525.



      Was deze informatie nuttig??

      Uw mening helpt om deze site te verbeteren.

      • Alias ID: MIGR-4VXJZU
      • Document ID: HT035740
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo