Niet ondersteunde browser gevonden

De Lenovo Support wesite ondersteunt Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+

      Cable damage may cause the system to hang, power off, or fail to boot - ThinkCentre A50, A51, A52, M52, S50, S51

      Symptom

      The system may fail to boot or complete post during startup, or it may hang or power off during use. The cable insulation may be damaged.

      Open case view showing chassis fan assembly. The fan cable harness may become pinched in-between the edge of the front chassis frame rail (green arrow) and the bottom edge of the front panel metal frame (red arrow).

      Pinch points

      Closed case view with front panel and fan mesh removed. The fan cable harness may become pinched between the edges of the front and bottom metal frames.

      Pinched cable

      The cable will be damaged as illustrated below

      Damaged cable

      Affected configurations

      Any of the following systems:

      • ThinkCentre A50 (type 8320, 8419)
      • ThinkCentre A51 (type 8424, 8425, 8428)
      • ThinkCentre A52 (type 8155, 8156, 8157, 8158, 8159, 8160, 8289, 8298, 8328, 8341, 8344, 8382)
      • ThinkCentre M52 (type 8099, 8116, 8215, 9210, 9211)
      • ThinkCentre S50 (type 8092, 8183, 8184, 8416, 8417, 8418)
      • ThinkCentre S51 (type 8098, 8171, 8172, 8173)
      Solution

      Repair or replace cables as necessary. Route the cables to prevent pinching.

      Search

      Was deze informatie nuttig??

      Uw mening helpt om deze site te verbeteren.

      • Alias ID: SF06-D0039
      • Document ID: HT001161
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo