> Boot Options# /boot/reset WARNING: Image number to be used is *NOT* 1 or 2!!! unpredictable results lie ahead!!! WARNING: Config block to be used is *NOT* "a", "b", or "f" unpredictable results lie ahead!!! WARNING: Selected image7 is invalid! Reset will use software "image7" and the **UNKNOWN** config block. >> Note that this will RESTART the Spanning Tree, >> which will likely cause an interruption in network service. If resetting ESM in this state, the switch boots with the factory default configuration. " />
Layer 2/7 switch loses config after updating firmware to 21.0.23.0 - IBM BladeCenter - Lenovo Support MY