지원되지 않는 브라우저가 발견되었습니다

Lenovo 지원 웹사이트는 Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ 지원합니다

      LCD Panel Service Replacement Guide - ThinkCentre M90z

      Information

      The servicer may order a FRU LCD, but receive one of two different vendor LCDs.  When removing the one vendor LCD, the servicer will be looking for the mounting screw holes to be located in the same location.  According to the picture below, there are two different locations to mount a Samsung and to mount a LG.

      Affected configurations

      The above symptom is associated with, but not limited to, the following systems:

      • ThinkCentre M90z (type 3265, 0800, 3091, 3373, 3429, 3650, 3678, 4285, 5205, 5248, 1195, 0870, 2471, 0852, 2557)
      Solution

      Follow the steps below to process the LCD panel replacement:

      Step 1:

      Please click here to download the M90z Hardware Maintenance Manual.

      Step 2:

      Go to the Hardware Maintenance Manual, "Chapter 8. Replacing FRUs", section "Replacing the LCD panel".

      Step 3:

      Identify the panel brand according to the part number matrix list below:

       

      Brand Part number FRU number
      Samsung 71Y9070 45K6443
      LG 71Y9071 45K6443

      Step 4:

      When installing the LCD panel, place the main bracket over the LCD panel and make sure the four screw holes in the main bracket align with those in the LCD panel as shown in the following pictures.  Reinstall the four screws that secure the LCD panel to the main bracket.  NOTE: First partially tighten all four screws and then fully tighten them.  This will allow the four screws to be installed correctly.

       

      Search

      이 정보가 도움이 되셨습니까??

      귀하의 피드백이 이 사이트를 개선시키는데 도움을 줍니다..

      • Alias ID:
      • Document ID: HT072785
      • 최종 업데이트 :17 Jun 2014
      • © 2016 Lenovo