BIOS Update for Windows Windows 7 (64-bit), Windows 10 (64-bit) - Lenovo V310-14ISK, V310-15ISK
Available Drivers
BIOS Update for Windows Windows 7 (64-bit), Windows 10 (64-bit) - Lenovo V310-14ISK, V310-15ISK
Windows 10 (64-bit)
Windows 7 (64-bit)
Description
This package provides BIOS Update and is supported on Lenovo V310-14ISK, V310-15ISK and running the following Operating Systems: Windows 7 (64-bit), Windows 10 (64-bit)
Compatible Devices
- Lenovo V310-14ISK, V310-15ISK
Compatible Operating Systems
- Windows 7 (64-bit), Windows 10 (64-bit)
What's More
Important Information
- BIOS, an abbreviation of Basic Input/Output System, is integrated into ROM chip on main board, which contains the basic input/output program, system configuration information, system startup self-check and pre-setup programs. BIOS provides most basic low-level hardware operations; it is the connection between software and hardware, and interfacing window of hardware and operating system.
Note1: Make note of any settings you have changed in the BIOS Configuration Utility. These settings may have to be re-entered after updating the BIOS.
Note2: If your Operating System version is Win7, please follow the step below to change your BIOS setting.
A. After flashing BIOS, the system will reboot and stop at Boot Menu page.
B. Press TAB then presses Enter.
C. Select Exit page.
D. Set OS Optimized Defaults to Disable.
E. Select Load Default Settings then Select Yes.
F. Select Exit Saving Changes then Select Yes.
G. System will reboot into Win7 OS.
Attention: Do not power off or restart your computer during the BIOS flashing process, which will cause serious damage and improper functioning of your computer.
Summary of Changes
Latest Version BIOS fixed all merged issues from previous.
Version 0ZCN52WW
General Information:
- Fixed LEN-27827 The Intel UEFI IKEv2 *example* private key is being shipped in IpSecDxe.
Downloading the package
- Click the file link to download the file from the web page.
- When prompted, select a drive and directory in which to save the downloaded file.
Install the package in Windows
- Locate the file 0zcn52ww.exe that has been downloaded.
- Double click the 0zcn52ww.exe icon.
- Follow wizard UI by making sure what BIOS to flash and flash on what platform.
- Finally, press Install & Finish to start flashing. During the process, you are advised not to turn off the computer.
- When the update finishes, the computer will automatically reboot for the changes to take effect.
Your feedback helps to improve the overall experience
Last Modified Date: 14 May 2024
Original Publish Date: 12 Jun 2017
Document ID: DS112898