Εντοπίστηκε μη υποστηριζόμενο πρόγραμμα περιήγησης

Η τοποθεσία Υποστήριξη Lenovo υποστηρίζει τα Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ και όλα τα υπόλοιπα σύγχρονα προγράμματα περιήγησης

      Keyboard bezel assembly removal and installation - ThinkPad T430u

      For access, remove these FRUs in order:

       

      Removal steps of keyboard bezel - Please perform the following steps as shown in the pictures below.

      Remove the rubber feet, and then remove the screws [1]. Then remove the screw [2] under the bottom cover and the screws [3] under the battery pack.

      Step
      Screw (quantity)
      Color
      Torque
      [1] M2.5 × 6.5 mm, wafer-head, nylon-coated (2) Black 0.392 Nm (4.00 kgf-cm)
      [2] M2 x 5 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm)
      [3] M2 x 3 mm, flat-head (6) Silver 0.181 Nm (1.85 kgf-cm)

      Turn the computer over to remove the screw [4] under the keyboard and the screw [5] in the wireless WAN card slot.

      Step
      Screw (quantity)
      Color
      Torque
      [4] M2 × 6.0 mm, wafer-head (1) Silver 0.392 Nm (4.00 kgf-cm)
      [5] M2 × 3.0 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgf-cm)

      Detach the connectors as shown in the following illustration.

       

      When installing: Ensure that the connectors are attached firmly.

      Release the keyboard bezel from the frame using a plastic pry tool as shown in the following illustration.

       

      When installing: Route the cables as shown in the following illustration before you attach the keyboard bezel.

       

      Σας φάνηκαν χρήσιμες αυτές οι πληροφορίες;?

      Τα σχόλιά σας μας βοηθούν να βελτιώνουμε την τοποθεσία..

      • Alias ID:
      • Document ID: PD025935
      • Last Updated :17 Jun 2014
      • © 2015 Lenovo