Navigateur non soutenu détecté

Le site Web Support Lenovo prend en charge Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+, ainsi que tout autre navigateur web moderne.

      ThinkVision LS1922s 18.5-inch LED Backlit LCD Monitor - Overview

      Features and specifications

      This monitor is best suited for individual study and entertainment, spreadsheet users and web browsing.

      The ThinkVision LS1922s Wide (60A7) is an 18.5" LCD monitor which adopts the latest W-LED backlight technology and provides great display quality and saves power consumption up to 40% compared to previous products. It is packed with green features including being mercury-free by adopting white LED backlights, arsenic-free glass, and by meeting the latest Energy-Star standard. In addition it provides a 1366 x 768 resolution. This widescreen monitor improves efficiency with easy viewing of multiple applications. It also coordinates with any ThinkCentre and IdeaCentre systems. It comes with a cost-optimized design and comes in a black color finish. The ThinkVision LS1922s is able to support ThinkCentre M92p “TINY” PC through VESA mounting from the back of the monitor via the Tiny VESA mounting bracket accessory.


      Features and Benefit:

      • 18.5-inch LED backlit LCD panel
      • 1366 x 768 resolution
      • 16:9 aspect ratio
      • Slim and practical design
      • Optimized tilt stand
      • Support ThinkCentre’s Tiny PC via VESA mount
      • Arsenic free / Pb free / Mercury free
      • Energy Star 6.0 Certified
      • Available in Business Black


      Feature Specification
      Monitor Size 18.5 inch Wide (470.1 mm)
      Viewable image size (diagonal) 18.5-inch (470.1 mm)
      Maximum viewable area (W x H) 409.8 x 230.4mm
      Native Resolution 1366 x 768
      Contrast ratio (typical) 1000:1
      Dynamic Contrast Ratio 3M:1
      Brightness (typical) 200 cd/m2
      Color Gamut 72%
      Aspect Ratio               16:9
      Pixel pitch


      Colors 16.7 million
      Horizontal viewing angle 170 degrees (at 10:1 contrast ratio)
      Vertical viewing angle 160 degrees (at 10:1 contrast ratio)
      Response time (typical) 5 ms
      Video input VGA
      Signal cable - 15-pin D               1.8 m
      SYNC Type Separate TTL
      SYNC on Green No
      Bezel width (Side) 15.6 mm
      Bezel width (Bottom) 0.91 inch (23.05 mm)
      Tilt -5~20 degrees backward
      Swivel None
      Lift None
      Pivot None
      VESA mount                        100 x 100 mm
      Lenovo Soundbar Support Yes
      Kensington lock slot Yes
      OSD Yes
      OSD language 8
      Preset display modes 16
      User-defined display modes 16
      VESA DDC capable


      Power supply Internal power adapter
      Power cord 1.8 m
      ISO 9241-307 compliance Yes
      ENERGY STAR 6.0                    Yes
      JEIDA compliance                       Yes
      FCC B compliance                       Yes
      EU Directive 2002/95/EC (RoHS)          Yes
      EU Directive 2002/96/EC (WEEE)          Yes
      China RoHS                              Yes
      CCC Yes
      China National Monitor Energy Efficiency Standard Tier 1    Yes

      On- Screen Display (OSD) Menu Control:

      Digital user controls are located on the front bezel, to the left of the power on/off pushbutton. Adjustments are made in conjunction with the OSDs. After adjustments are made, with exception of brightness, contrast, and auto adjust, the controls can be locked to prevent further changes. User setup values are stored automatically.  For ease of use, there is direct access for when using dual input, auto setup, and brightness.

      Monitor controls and features include:

      • Brightness/Contrast
      • Image Position:
        • Horizontal position
        • Vertical position
      • Image setup:
        • Automatic
        • Manual
      • Image properties:
        • Color
        • Scaling
      • Options:
        • Information
        • Menu language
        • Menu position – Default, Custom (H/V)
        • Factory default - Cancel, O.K
        • Accessibility - Button Repeat Rate (Off, Default, Slow), Menu Timeout (5 to 60 sec)
      • Exit

      The OSD menu supports the following languages: English, Spanish, Italian, German, French, Japanese, Russia, and Chinese


      Physical specifications
      Dimensions and weight of the monitor and stand
      Parameter Unpacked Packed
      Height 14.54 inch (370.1 mm)            16.51 inch (420.0mm

      17.38 inch (442.2mm)                                        

      19.65 inch (500.0mm))

      8.25inch (210.0mm)

      5.34 inch (136.0 mm
      Weight 6.55 lb (2.97 kg)        8.75 lb (3.97 kg) 


      Operating environment
      Conservation: Energy can be saved by switching monitors off overnight and whenever they are not in use for extended periods during the day. 


      Power requirements
      • Input Voltage 90---264VAC
      • Frequency:  50-60Hz +/- 3Hz
      • Power Consumption
        • Maximum:  24 watts – 18 watts
        • Typical:  18 watts – 14 watts
        • VESA standby: < 1 watts
        • VESA suspend: < 1 watts
        • VESA off: < 0.5 watts
        • Maximum earth leakage current
      • Terminal – PE (Protective Earth)
      • Maximum  3.5 mA at 90V-264 V
      • Terminal – (Accessible parts and circuits not connected to protective earth)
      • Maximum 0.25 mA at 90V-264 V




      Ambient temperature and relative humidity
      Parameter Temperature Relative humidity Altitude
      Operating 0 to 40 deg.C 8 to 80 %

      0 to  8,000 ft (2,438 m)

      Shipping -20 to 60 deg. C 5 to 95 %

      0 to 40,000 ft (12,192 m)

      Storage -20 to 60 deg. C 5 to 95 % 0 to 40,000 ft (12,192 m)


      Declared acoustical noise emissions LWAU = 4.5 bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779.



      Compliance to the ISO standard ISO 9241-307 provides that ergonomic requirements are met when the monitor forms part of an ISO-compliant system.



      Three years - Customer Carry-in or Mail-in using Rapid Replacement Service

      • Announce date: 12 March 2013 (Worldwide)
      • Planned availability date: 30 April 2013 (Worldwide)


      Hardware compatibility

      The ThinkVision LS1922s Wide LCD monitor is intended to operate with system units or video adapters that generate a video output signal falling within the following specification:

      Parameter Monitor
      Maximum resolution 1366 x 768 pixels
      Optimum resolution 1366 x 768 pixels
      Maximum pixel rate  135 MHz(VGA)


      Preset Display Modes

      Factory Mode: VGA

      (H x V Pixels)
      Incoming video refresh rate
      PAL VGA     50 Hz
      640x350 70 Hz
      720 x 400 70 Hz
      640x480 60 Hz
      640x480 72 Hz
      640x480 75 Hz
      800x600 60 Hz
      800x600 72 Hz
      800x600 75 Hz
      1024x768 60 Hz
      1024x768 70 Hz
      1024x768 75 Hz
      1280x720  60 Hz
      1360x768 60 Hz
      1360x768 ** 60 Hz

      ** Optimum Display Mode)

      Supplemental information

      Note (**): This is the optimum display mode for the best displayed image. Reduced image quality may result if used in other modes due to the image scaling limitations of LCD monitor technology.

      User modes: 16 (VGA mode)

      Software requirements
      The ThinkVision LS1922s features factory-preset display modes. The actual display modes used depend on the attaching system unit, the operating system, and application software.
      • Microsoft Windows Vista
      • Microsoft Windows 7
      • Microsoft Windows 8



      Agency approvals



      • Cc(TUV)us (USA/Canada)-------covered by cTUVus
      • IEC950 CB Report
      • SEMKO
      • NOM(Mexico)
      • SASO (Saudi Arabia)
      • CE (Europe)
      • TUV(Germany)
      • CCC (China)
      • Gost (Russia)-----------by Lenovo
      • PSB (Singapore)
      • Ukraine------------by Lenovo
      • KEBS (Kenya)
      • e-standby (Korea)
      • BSMI
      • JEIDA
      • TUV –S(Argentina)
      • ISC(Cambodia)
      • Kuwait
      • KVALITET(Serbia)
      • INSM(Moldavia)
      • STZ(Uzbekistan)
      • BELLIS(Belarus)
      • KONCAR(Croatia)
      • OTAN(Kazakhstan)
      • SONCAP(Nigeria)
      • CSC(China)
      • China National Monitor Energy Efficiency Standard (Tier 1)


      • FCC B (USA)
      • IC (Canada) ---------- covered by FCC
      • CE (Europe)
      • VCCI (Japan)
      • KC (Korea)
      • Australia/New Zealand
      • South Africa (SABS-CoC, LoA)
      • BSMI (Taiwan)
      • CCC (China)


      • Energy Star 6.0
      • GS
      • ISO 9241-307


      • Microsoft Windows 7/8
      • EU Directive 2002/96/EC – WEEE
      • EU Directive 2002/95/EC – RoHS
      • China RoHS

      Standard: COMMISSION REGULATION (EC) No 1275/2008 (ANNEX I point 2 for ITE product)


      • Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards and application software.
      • Horizontal- and vertical- synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
      • Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
      • The number of colors shown in any display mode (up to a maximum of 1.07 billion) is not limited by the monitor, but depends on the capabilities of the video adapter in the system unit.
      • Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter.
      • Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug and Play to be effective.
      • Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.

      Additional Product information
      Service Parts - Parts listing for your product
      Configuration files - Downloads and drivers for your product
      Publications - Instruction manuals for your product
      Personal Systems Reference (PSREF) - Comprehensive information on the features and technical specifications on Lenovo products


      Est-ce que cette information a été utile??

      Vos commentaires nous aident à améliorer ce site..

      • Alias ID:
      • Document ID: PD026602
      • Dernière mise a jour :31 May 2016
      • © 2016 Lenovo