Please note: This website includes an accessibility system. Press Control-F11 to adjust the website to the visually impaired who are using a screen reader; Press Control-F10 to open an accessibility menu.

End of Development Support

This product is no longer being actively supported by development (End of Development Support) and no further software updates will be provided. Any software or support resources provided by Lenovo are made available “AS IS” and without warranties of any kind, express or implied. Products still covered under the Lenovo Limited Warranty will be covered for repair.

Broadcom Ethernet LAN Driver for Windows XP - IdeaPad S9e, S10 (MT 4329, 4333) and S10e

Broadcom Ethernet LAN Driver for Windows XP - IdeaPad S9e, S10 (MT 4329, 4333) and S10e

Available Drivers
File name
Size
Version
Operating System
Release Date
Severity
Options

Broadcom Ethernet LAN Driver for Windows XP - IdeaPad S9e, S10 (MT 4329, 4333) and S10e

5.044 MB
Ver.10.85.0.0

Windows XP (32-bit)

25 Nov 2008
Recommended

Broadcom Ethernet LAN Driver

54lb02ww.exe

5.04 MB
Ver.10.85.0.0

Windows XP (32-bit)

25 Nov 2008
Recommended

README for Broadcom Ethernet LAN Driver

54lb02ww.txt

4.41 KB
Ver.10.85.0.0

Windows XP (32-bit)

25 Nov 2008
Recommended

Description

Broadcom LAN driver for the IdeaPad S9e, S10 (MT 4329, 4333) and S10e on systems running Windows XP.

What's More

This package installs the software (LAN driver) to enable the following audio chips on the system board.

- Broadcom NetLink (TM) Fast Ethernet

The following systems are supported:

- IdeaPad S9e and S10e
- IdeaPad S10 (MT 4329, 4333)

Note:
If this package has been installed, updating (overwrite-installing) this package will fix problems, add new functions, or expand functions as noted below.
Additional information
Contents
Summary of changes
Installation instructions
Determining which version is installed

Summary of changes
Version 10.85.0.0
  • (New) Support for IdeaPad S9e/S10e/S10
Installation instructions

Note: If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Version Information section.

Manual Install

  1. Start Windows XP and logon with administrative privileges.
  2. Double-click the driver package to extract it to your hard drive.
  3. Click Start, then click Run...
  4. Specify "SETUP.EXE" with the full path name where you extracted the package in step 2, and click OK. Example: C:\DRIVERS\WIN\LAN\"this filename"\SETUP.EXE
  5. Follow the instructions on the screen.

Unattended Install
Note: This is for system administrators use only.
  1. Start Windows XP and logon with administrative privileges.
  2. Double-click the driver package to extract it to your hard drive.
  3. Click Start, then click Run...
  4. Specify "SETUP.EXE /s " with the full path name where you extracted the package in step 2, and click OK. Example: C:\DRIVERS\WIN\LAN\"this filename"\SETUP.EXE /s
  5. Follow the instructions on the screen.
Determining which version is installed
  1. Start Windows XP.
  2. Click Start and then click Control Panel.
  3. Click the Performance and Maintenance.
  4. Click the System icon.
  5. Click the Hardware tab.
  6. Click the Device Manager button.
  7. Double-click the Network adapters section.
  8. Select Broadcom NetLink(TM) Fast Ethernet.
  9. Right-click Broadcom NetLink(TM) Fast Ethernet, and select Properties.
  10. Click the Driver tab. The version number will be displayed.

Was this information helpful?

Your feedback helps to improve the overall experience

Alias Id: MIGR-71118

Last Modified Date: 05 Mar 2020

Original Publish Date: 25 Nov 2008

Document ID: DS001218

Feedback