Browseren du anvender understøttes ikke.

Lenovo Support websiden kræver Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+, og andre moderne web browsere.

      Setting the default carrier firmware when installing GOBI 3000 driver.

      Symptom

      By default, the GOBI 3000 driver installs the Verizon carrier firmware.

      Affected configurations

      Thinkpad L420, L421, L520, T420, T420i, T420s, T420si, T520, T520i, W520, X1, X220, X220i, X220 Tablet, X220i Tablet

      Solution

      The LenovoQMISetup.exe for the GOBI 3000 driver allows setting the firmware when the driver is installed by using the option DEFAULTIMAGE=<image number>.

      The image numbers are:

       

      0      Vodafone Image  

      1      Verizon Image  

      2      AT&T Image  

      3      Sprint Image

      4      T-Mobile Image  

      6      Generic UMTS Image  

      7      Telefonica Image  

      8      Telecom Italia Image  

      9      Orange Image  

       

      So to install the driver with the default UMTS firmware would be;

             C:\Drivers\WWANSR\LenovoQMISetup.exe  DEFAULTIMAGE=6

      Additional Information

      The GOBI 300 driver LenovoQMISetup.exe uses the settings in Configuration.ini by default.  Setting a parameter as part of running LenovoQMISetup.exe will override those values. 

      For example:

                   C:\Drivers\WWANSR\LenovoQMISetup.exe  SILENT=1 DEFAULTIMAGE=6

      will silently install the driver using the UMTS generic image rather than the Verizon image.

       

      It is possible also to change the setting in the Configuration.ini file as well.

       

      [Default Values]

      DEFAULTIMAGE=1

      SS=1

      WIN7DRIVER=1

      CARRIER0=1

      CARRIER1=1

      CARRIER2=1

      CARRIER3=1

      CARRIER4=1

      CARRIER6=1

      CARRIER7=1

      CARRIER8=1

      CARRIER9=1

      CARRIER14=1

      CARRIER16=1

      LOCATIONDRIVER=1

      GPS=1

      GPSAUTO=0

      DELETEALLIMAGES=1

      FWUPDATE=AUTO

      SILENT=0

      LOG=1

       

      For most options, a value of 1 enables the feature and 0 disables it.  For example; changing the setting SILENT=1 will by default have LenovoQMISetup.exe run silently every time, and changing the DEFAULTIMAGE setting will change the default image loaded when the driver is installed.

      Search

      Var denne information brugbar??

      Din tilbagemelding forbedrer denne side.

      • Alias ID:
      • Document ID: HT050584
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo