Nicht unterstützten Browser erkannt

Die Lenovo Support Webseite unterstützt den Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+

      ThinkVision L1711p 17.0-inch Monitor - Overview

      ThinkVision L1711p 17-inch Wide Monitor (5047)

      ThinkVision L1711p 17-inch Monitor (5047)
      Machine Type - Models: 5047-HN2, 5047-HB2


      Features and specifications

      The ThinkVision L1711p 17-inch Monitor (5047) features:

      • 17-inch with 1280 x 1024 resolution; 5:4 aspect ratio
      • VGA analog and DVI digital video input, including:
        • Dual input for attachment of two systems concurrently; the user selects which PC system image is display
      • Ergonomic stand with multiple user adjustments: tilt and lift
      • Microsoft Windows 7 certified
      • Compliance includes:
        • TCO Display 5.0 rated
        • EPEAT GOLD rated
        • ENERGY STAR 5.0 (United States)
      • Supports attachment of optional ThinkVision Soundbar
      Feature Specification
      Monitor Size 17.0-in (432-mm) LCD
      Viewable image size 17.0 in / 432 mm
      Maximum viewable area (W x H) 338 x 270 mm
      Native resolution 1280 x 1024
      Video input VGA Analog, DVI-D Digital
      Contrast ratio (typical) 1000 : 1
      Brightness (typical) 250 cd/m2
      Colors 16.7 million
      Viewing angle (typical) Horizontal: 160 degrees (at 10:1 contrast ratio)
      Vertical: 160 degrees (at 10:1 contrast ratio)
      Response time (typical) 5 ms
      Pixel pitch 0.264 mm
      VGA analog video cable 1.8 m
      DVI digital video cable 1.8 m
      Tilt 3 degrees forward
      20 degrees backward
      Height adjustment 110 mm
      Soundbar Attachment Optional ThinkVision Soundbar
      Kensington Security Lock Slot  Yes
      User controls Digital
      Lockable controls Yes
      OSD Yes
      OSD languages 8
      Preset display modes 17
      User defined display modes 22
      VESA DDC capable 2B/CI
      ISO 9241-307 capable Yes
      Power management capable Yes - VESA DPMS
      Power supply Universal Voltage (100 to 240 VAC)
      Power cord - detached 1.8 meter
      JEIDA compliance Yes
      FCC B compliance Yes
      TUV-GS Yes
      MPR-2 Emission compliance Yes
      TCO 5.0 Environmental Label Yes
      EU Directive 2002/95/EC (RoHS) Yes
      EU Directive 2002/96/EC (WEEE) Yes
      REACH Yes
      EuP* Yes

      * Directive: 2005/32/EC Standard: COMMISSION REGULATION (EC) No 1275/2008 (ANNEX I point 2 for ITE product).

      Physical specifications
      Parameter Unpacked Packed
      Width 14.6 inch (370 mm) 16.61 inch (422 mm)
      Depth 6.1 inch (155 mm) 17.65 inch (456 mm)
      Height 16.0 inch (406 mm) 5.94 inch (151 mm)
      Weight 9.3 lb (4.21 kg) 12.7 lb (5.77 kg)
      Weight - without lift/tilt stand 6.8 lb (3.10 kg) - - - - - - - -


      Power requirements
      • Input voltage: 100 to 240 V ac +/- 10%
      • Frequency: 50/60 Hz +/-3 Hz
      • Power consumption:
        • Normal use: < 18 watts typical*
        • VESA Standby: <1 watts
        • VESA Suspend: <1 watts
        • VESA Off: < 0.5 watts at 100 V ac
        • Maximum earth leakage current:
          • < 3.5 mA at 264 Vac
          • < 0.25 mA at 100 Vac

      * Typical power consumption is tested under EPA 5.0 standard. Actual power consumption depends on the chosen display mode, the images displayed, and user control settings.


      Ambient temperature and relative humidity
      Parameter Temperature Relative humidity Altitude
      Operating 10 to 45 deg.C 10 to 80 % 0 to 8,000 ft (2,438.4 m)
      Shipping -20 to 60 deg. C 5 to 95 % 0 to 40,000 ft (12,192 m)
      Storage -20 to 60 deg. C 5 to 95 % 0 to 40,000 ft (12,192 m)



      Declared acoustical noise emissions LWAU = 4.5 bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779.


      • One monitor
      • Attached lift, and height adjustment stand
      • Attached 1.8-meter (5.9-ft) analog video signal cable (15-pin D to 15-pin D)
      • Detached 1.8 meter digital (DVI-D to DVI-D) cable
      • Power cord
      • A 3 -> 2-pin AC adapter (Japan only)
      • A Japanese proof of purchase card (Japan only)
      • A CD containing multilingual user's guide, setup test pattern, and .INF File
      • Setup poster
      • Safety, troubleshooting and warranty guide

      Note: With the exception of the models for U.S., Canada, and Japan, the power cords (based on the country order code) are supplied by distribution centers.



      Three years - Customer Carry-in or Mail-in using Rapid Replacement Service

      • Announce date: 20 Oct 2009 (Worldwide and Topseller: Europe/Middle East/Africa)
      • Planned availability date: 06 Nov 2009 (Worldwide and Topseller: Europe/Middle East/Africa)


      Hardware compatibility

      The display is intended to operate with system units or video adapters that generate a video output signal falling within the following specification:

      Parameter Monitor
      Maximum addressability (pixels) 1280 x 1024
      Maximum pixel rate (MHz) 165

      The ThinkVision L1711p supports VESA Standard Timings as detailed in "Display Monitor Timing Specification," Version 1.0, Revision 0.8, dated September 17, 1998, for the following modes:

      • VGA: 640 x 480 at 60, 66, 72 and 75 Hz
      • SVGA: 800 x 600 at 60, 72 and 75 Hz
      • XGA: 1024 x 768 at 60, 70 and 75 Hz
      • SXGA: 1280 x 1024 at 60, 70, 72 and 75 Hz

      This monitor also supports the following modes:

      • 640 x 350 at 70 Hz
      • 720 x 400 at 70 Hz

      Note: National language support is a function of the video adapter in the system unit and the application or support software.

      Preset Display Modes
      (H x V Pixels)
      Incoming video refresh rate
      640 x 350 70 Hz
      640 x 480 60 Hz
      66 Hz
      72 Hz
      75 Hz
      720 x 400 70 Hz
      800 x 600 60 Hz
      72 Hz
      75 Hz
      1024 x 768 60 Hz
      70 Hz
      75 Hz
      1280 x 1024 60 Hz
      70 Hz
      72 Hz
      75 Hz
      • User modes: 22

      The preset modes cannot be overwritten, but can be adjusted to personal choice. The new settings are stored automatically in one of the user locations and are recalled each time that mode is used. The factory settings for the mode in use, if any, can be restored by operating the reset control.

      Information about the current incoming display mode is shown in the on-screen displays. However, it is displayed at the LCD panel's optimum refresh rate of 60 Hz.

      It may be necessary to make some adjustments to the displayed image to compensate for variations in video signal timings. The user controls can be used to make these adjustments.

      The ThinkVision L1711p 17.0-inch Flat Panel LCD Monitor (5047-HB2 and Topseller 5047-HN2) is supplied with a detachable 1.8 m (5.9 ft) video signal cable. The two cables included are: 15-Pin D-shell analog cable and a DVI-D digital cable.

      This monitor has been tested with ThinkCentre and ThinkPad systems and is compatible with systems and graphics adapters which comply with the relevant parts of "VESA and industry standards and guidelines for computer display monitor timing" Version 1.0 Revision 0.8, adopted September 17, 1998. Supported display modes and number of colors are a function of the attaching system unit. The full range of display modes, refresh rates, and number of colors available with this monitor may not be available or supported with all combinations of system units, their operating systems, and application software. Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective.

      Software requirements
      • Microsoft Windows XP
      • Microsoft Windows Vista
      • Microsoft Windows 7


      Ergonomics/Emissions/Environmental/Compatibility Approvals
      • TCO 5.0
      • MPR-2 (Sweden)
      • ISO 9241-307
      • ENERGY STAR 5.0 (U.S.)
      • Microsoft Logo - Windows XP/Vista
      • RoHS
      • WEEE
      • e-Standby (Korea)
      • REACH
      • EuP*

      * Directive: 2005/32/EC Standard: COMMISSION REGULATION (EC) No 1275/2008 (ANNEX I point 2 for ITE product)


      Agency approvals - EMI/Safety
      • UL (U.S.)
      • CSA/cUL (Canada)
      • IEC950 CB Report
      • NEMKO (Norway)
      • SEMKO
      • DEMKO (Denmark)
      • FIMKO (Finland)
      • TUV
      • CCC (China)
      • NOM
      • SASO
      • GOST
      • PSB (Singapore)
      • BSMI
      • JEITA
      • Australia
      • Jordon
      • UL-S (Argentina)
      • FCC B (U.S.)
      • IC (Canada)
      • CE (Europe)
      • KC (Korea)
      • VCCI Class B (Japan)
      • New Zealand
      • South Africa
      • Cambodia
      • Serbian


      • Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards, and application software.
      • Horizontal- and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
      • Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
      • The number of colors shown in any display mode will exceed 16 million and dependent on the capabilities of the video adapter in the system unit.
      • The ThinkVision L1711p provides FCC class B - residential installation - compliance in all display modes.
      • Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter.
      • Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug and Play to be effective.
      • Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.
      • The Lenovo ThinkVision L1711p meets the ISO 9241-307 Pixel Defect Standard.
      • Use of 50% gray background is not recommended since some users may experience undesirable FOS effects.
      • The Auto-Setup "test pattern" can be used with Windows 3.1, Windows NT 3.5, Windows NT 4.0, Windows 95, Windows 98, Windows 2000, Windows XP, Window Vista, and DOS 7.0 only.


      Additional Product information
      Configuration files - Relevant files for your product
      Service parts - Parts listing for your product
      Publications - Instruction manual for your product
      Personal Systems Reference (PSREF) - Comprehensive information on the features and technical specifications on Lenovo products


      War diese Information hilfreich??

      Ihr Feedback hilft uns diese Seite zu verbessern..

      • Alias ID: MIGR-73633
      • Document ID: PD011688
      • Letztes Update :12 Oct 2016
      • © 2016 Lenovo