Navegador no compatible detectado

El sitio web de soporte de Lenovo es compatible con Microsoft© Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ y cualquier otro navegador web moderno.

      ExpressCache & IFFS Partition Recreation

      Use this procedure if you are replacing an mSATA drive

      Preparation
      1. Determine which configuration your product supports (Cache only or Cache+IFFS)
      2. Install ExpressCache application in a Windows 7 system.(No mSATA attached)
      3. Copy the vbs files into any directory, e.g. c:\SWTOOLS\

       

      Configuring the Partition:
      1. Plug mSATA into the unit (ExpressCache and vbs file ready).
      2. Run cmd.exe with administrator rights (start->all programs->accessories->command prompt)
      3. cd c:\SWTOOLS\ (go to your vbs directory )
      4. xxxx.vbs (input corresponding vbs file)
      5. Press Enter (warning message will popup if mSATA / ExpressCache is not ready or partition exists in mSATA)
      6. Reboot after successful information appears.

       

      Supplement

      During the running of above vbs file, the following popup message may appear:

      1. "You have not installed Diskeeper ExpressCache, Please install the Software first"
        • Please install ExpressCache application first , then run the vbs file again.
      2. "There is NO mSATA detected, please check mSATA attached"
        • Please plug your mSATA device first, then run the vbs file again.
      3. "You have partitions on your mSATA device. Please back up and delete it"
        • Please run clean_msata.vbs first (same step as above vbs file), then run the previous vbs file again.

       

      Search

      ¿Fue útil esta información??

      Sus comentarios nos ayudan a mejorar este sitio..

      • Alias ID:
      • Document ID: HT073737
      • Last Updated :17 Jun 2014
      • © 2016 Lenovo