Please note: This website includes an accessibility system. Press Control-F11 to adjust the website to the visually impaired who are using a screen reader; Press Control-F10 to open an accessibility menu.

End of Development Support

Your product may no longer be actively supported by development (End of Development Support). Any resources provided by Lenovo for such products are made available “AS IS” and without warranties of any kind, express or implied. In no case will Lenovo be liable for the failure of any provided resources to function as expected or intended and the loss of, or damage to, data. To determine if your product is still actively supported by development, enter your serial number or product type below.

Enter Serial Number: OR Detect Product

ideacentre AIO 700-24ISH & AIO 700-27ISH BIOS

ideacentre AIO 700-24ISH & AIO 700-27ISH BIOS

Available Drivers
File name
Size
Version
Operating System
Release Date
Severity
Options

ideacentre AIO 700-24ISH & AIO 700-27ISH BIOS

3.320 MB
O1KKT35A

Windows 10 (64-bit)

Windows 7 (32-bit)

Windows 7 (64-bit)

17 Mar 2016
Optional

ideacentre AIO 700-24ISH & AIO 700-27ISH BIOS

o1kjy35usa.exe

3.31 MB
O1KKT35A

Windows 10 (64-bit)

Windows 7 (32-bit)

Windows 7 (64-bit)

17 Mar 2016
Optional

ideacentre AIO 700-24ISH & AIO 700-27ISH BIOS READ ME

o1kjy35usa.txt

10.4 KB
O1KKT35A

Windows 10 (64-bit)

Windows 7 (32-bit)

Windows 7 (64-bit)

17 Mar 2016
Optional

Description

ideacentre AIO 700-24ISH & AIO 700-27ISH BIOS

What's More

Flash Under Operating System
1.  Please make note of any settings you have changed in the BIOS Setup utility. They may have to be re-entered after updating the BIOS.
2.  Run the application "O1KJY35USA.exe" with Administrator privilege to start flash process.
3.  You may first see a confirmation prompt "Proceed with BIOS update now?". Click "Yes" to continue.
4.  You will see the prompt "Would you like to update the Serial Number?". Input "n" and press Enter
5.  Then you will see the prompt "Would you like to update the Machine Type and Model?". Input "n" and press Enter again. Then the BIOS update process will start.
6.  Update may take up to 2 minutes. Do not power off or restart the system during this procedure! After Windows update process ends, the system will automatically reboot to continue the flash process.
7.  After the system reboots, the BIOS update process will continue with a graphic UI. When the BIOS update process ends, the system will reboot automatically.
8.  You may see a POST error "0162: Setup data integrity check failure" after reboot. It is a normal behavior. Press F1 to enter BIOS Setup Utility, and then press F10 to save your settings.
9.  The BIOS update process ends with above eight steps.
Was this information helpful?

Your feedback helps to improve the overall experience

Last Modified Date: 05 Mar 2020

Original Publish Date: 17 Mar 2016

Document ID: DS104871

Feedback