Firmware Upgrade for HLDS GSA-H60N Multiburner - 3000 J200, J200p, J205, S200, S200p, ThinkCentre A61e, M55, M55e, M57, M57p, ThinkStation S10, D10
Available Drivers
Firmware Upgrade for HLDS GSA-H60N Multiburner - 3000 J200, J200p, J205, S200, S200p, ThinkCentre A61e, M55, M55e, M57, M57p, ThinkStation S10, D10
Linux
Windows Vista (32-Bit)
Windows Vista (64-Bit)
Windows XP (32-bit)
Firmware update for HLDS Multiburner GSA-H60N
f6s4andnl32.exe
Linux
Windows Vista (32-Bit)
Windows Vista (64-Bit)
Windows XP (32-bit)
Installation instructions for firmware update HLDS Multiburner GSA-H60N
f6s4andnl32.txt
Linux
OS Independent
Windows Vista (32-Bit)
Windows Vista (64-Bit)
Windows XP (32-bit)
Description
This firmware update was created to fix problem where the HLDS GSA-H60N Multiburner not being detected when the system resumes from Standby mode.
Compatible Devices
This package applies to the following systems configured with the HLDS Multiburner GSA-H60N drive (service part number FRU 43C1042, 41R0110):
- 3000 J200 (type 9690, 9691)
- 3000 J200p (type 9688, 9689)
- 3000 J205 ( type 9686, 9687)
- 3000 S205 (type 9680, 9681)
- 3000 S200 (type 9684, 9785)
- ThinkCentre M55e (type 9636, 9638, 9640, 9641, 9642, 9643, 9644, 9645)
- ThinCentre A61e (type 6417, 6418, 6449, 6453)
- ThinkCentre M55 (type 8793, 8797, 8801, 8805, 8810, 8814, 8011, 9166, 8792, 8796, 8800, 8804, 8808, 8813, 8010, 9168, 8794, 8798, 8802, 8806, 8811, 8816, 8012, 9167, 8791, 8795, 8799, 8803, 8807, 8812, 8009)
- ThinkCentre M57 (type 6008, 6010, 6019, 6062, 6065, 6066, 6068, 6069, 6071, 6072, 6074, 6075, 6076, 6077, 6079, 6081, 6082, 6086, 6087, 6089, 6393, 6394, 6395,6395, 9172, 9174, 9181, 9182)
- ThinkCentre M57p (type 6064, 6067, 6073, 6078, 6088, 6395, 6397, 9011, 9012, 9013, 9014, 9018, 9019, 9071, 9087, 9088, 9089, 9096, 9160, 9162, 9164, 9163 9193, 9194, 9196, 9303)
- ThinkStation D10 (type 6493, 6427)
- ThinkStation S10 (type 6423, 6483)
What's More
This firmware update was created to fix problem where the HLDS GSA-H60N Multiburner not being detected when the system resumes from Standby mode. |
Additional information |
---|
Windows Vista
Windows XP
Note : The update will proceed automatically. When the update is complete, you will be given the choice "REBOOT" or "EXIT". Click "REBOOT" to restart the system immediately, or "EXIT" if you wish to restart the system later. The firmware upgrade will take effect after the system is restarted. |
||
Your feedback helps to improve the overall experience
Alias Id: MIGR-69683
Last Modified Date: 05 Mar 2020
Original Publish Date: 10 Apr 2008
Document ID: DS001308