Intel SATA Controller AHCI Driver for Windows 7 (64-bit) - ThinkPad Edge 11, Edge 13 (MT: 0217, 0250), Edge E10 and Edge E31 (MT: 0217, 0250)

Intel SATA Controller AHCI Driver for Windows 7 (64-bit) - ThinkPad Edge 11, Edge 13 (MT: 0217, 0250), Edge E10 and Edge E31 (MT: 0217, 0250)

Available Drivers
File name
Size
Version
Operating System
Release Date
Severity
Options

Intel SATA Controller AHCI Driver for Windows 7 (64-bit) - ThinkPad Edge 11, Edge 13 (MT: 0217, 0250), Edge E10 and Edge E31 (MT: 0217, 0250)

559.46KB
9.6.2.1001

Windows 7 (32-bit)

Windows 7 (64-bit)

03 Sep 2010
Recommended

Intel SATA Controller AHCI Driver

84s151ww.exe

553.37 KB
9.6.2.1001

Windows 7 (32-bit)

Windows 7 (64-bit)

03 Sep 2010
Recommended

README for Intel SATA Controller AHCI Driver

84s151ww.txt

6.09 KB
9.6.2.1001

Windows 7 (32-bit)

Windows 7 (64-bit)

03 Sep 2010
Recommended

Description

Intel SATA Controller AHCI Driver for Windows 7 (64-bit) - ThinkPad Edge 11, Edge 13 (MT: 0217, 0250), Edge E10 and Edge E31 (MT: 0217, 0250)

What's More

This package installs the software (AHCI Controller) to enable the following device.
- Intel® 5 series 4 Port SATA AHCI controller

Supported ThinkPad systems:
- Edge 11, Edge E10 (Intel Models)
- Edge 13, Edge E30 (MT: 0217, 0250)

Supported Operating Systems:
- Microsoft Windows 7 64-bit

Note:
- This program is language independent and can be used with any language system.
- If this package has been installed, updating (overwrite-installing) this package will fix problems, add new functions, or expand functions as noted below.
Additional information
Contents
Summary of changes
Notes
Installation instructions
Version Information

 

Summary of changes

Where:

  • [Important] Important update
  • (New) New function or enhancement
  • (Fix) Correction to existing function

Version 9.6.2.1001

  • (New) Initial release for ThinkPad Edge 11", E10 (Intel models).
  • (New) Initial release for ThinkPad Edge 13", E31 (Machine types: 0217,0250).

 

Installation instructions

Note: If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Version Information section.

Manual Install

This section assumes to use Internet Explorer and Windows Explorer.

[Downloading file]

  1. Click once on the underlined file name. Once this is done, some pop-up windows will appear.
  2. Follow the instructions on the screen.
  3. In the window to choose Run or Save, click the Save button.
  4. Choose the folder you would like to download the file to and click the Save button. A different window will appear and the download will begin and complete. Once the download has completed, there may or may not be a message stating that the download completed successfully.

[Extracting file]

  1. Make sure to be logged on with administrative privileges.
  2. Locate the folder where the file was downloaded.
  3. Locate the file that was downloaded and double-click it.
  4. Follow the instructions on the screen.
  5. In the "Select Destination Location" window, click Next. If you would like to select a different folder, click Browse.
  6. In the "Ready to Install" window, click Install. All the necessary files will be extracted to the folder selected in Extracting File Step 9.
  7. Uncheck the checkbox next to "Install ..... now", and then click Finish to complete extraction.

Delete the file saved in step 4.

[Update or clean install for Windows 7]

  1. Click Start.
  2. Right-click Computer, then click Properties. At the left pane, click Device Manager.
  3. Double-click the IDE ATA/ATAPI controllers category.
  4. Double-click either of the following devices.
    • Standard AHCI 1.0 Serial ATA Controller
    • Intel(R) 5 series 4 Port SATA AHCI controller
  5. Click the Driver tab, then click Update Driver Software...
  6. Click Browse my computer for driver software.
  7. Click Browse..., then point to driver location specified in step 9.
  8. Make sure the checkbox next to "Include subfolders" is checked and click Next.
  9. Click Close when the installation has completed.
  10. Click Yes to restart the computer.

Delete the file saved in the step 4.

Unattended Install

Not supported.

Version Information
To check the version of the device driver that is installed on your system, follow these instructions:
  1. Click Start.
  2. Right-click Computer, and then click Properties.
  3. At the left pane, click Device Manager.
  4. Double-click the IDE ATA/ATAPI controllers category.
  5. Double-click Intel(R) 5 series 4 Port SATA AHCI controller.
  6. Click the Driver tab.
  7. Check Driver Version.
Was this information helpful?

Your feedback helps to improve the overall experience

Alias Id: MIGR-76330

Last Modified Date: 02 Jul 2015

Original Publish Date: 03 Sep 2010

Document ID: DS000800

Feedback