Please note: This website includes an accessibility system. Press Control-F11 to adjust the website to the visually impaired who are using a screen reader; Press Control-F10 to open an accessibility menu.

Hard drive installation movie - ThinkCentre A51, A52, M52, M52e

Hard drive installation movie - ThinkCentre A51, A52, M52, M52e

Hard drive installation movie - ThinkCentre A51, A52, M52, M52e

Movie player help

 

Hard drive removal movie

 

Text of the audio portion of this movie

To install the hard disk drive in bay 4:

  • Flex the tray to allow the pins in the tray to seat in the holes in the drive.
  • Align the drive tray with the channels in the drive bay and insert the drive all the way into the bay.
  • Connect the SATA signal cable and the power cable.
  • Install the bezel. Insert the four tabs on the top of the bezel into the matching slots in the chassis.
  • Push the bottom of the bezel toward the system until the two latching tabs at the bottom of the bezel lock into place. Here is a closer look at the tabs on the bezel and the tabs at the top of the bezel.
  • Install the side cover. Position the bottom of the cover over the edge of the chassis.
  • Rotate the cover down while aligning the tabs on the cover with the slots in the chassis.
  • Slide the cover forward until it is secured in place. Here is a closer look at the cover tab and a slot in the chassis.
  • Return the system to its operational position.

 

Purchase parts online


Alias Id:MIGR-60972
Document ID:PD013513
Original Publish Date:01/04/2011
Last Modified Date:09/25/2018