Print
login Cuenta
Search

D153 15-inch Flat Panel LCD Monitor - Overview

Features and specifications
FeatureSpecification
Monitor Size15.0-inch (381.0 mm)
Viewable image size15.0-inch (381.0 mm)
Maximum viewable area228 mm x 304 mm
Contrast ratio (typical)600 : 1
Brightness (typical)250 cd/m2
Colors16.7 million
Horizontal viewing angle150 degrees (at 10:1 contrast ratio)
Vertical viewing angle130 degrees (at 10:1 contrast ratio)
Response time (typical)8 ms
Pixel pitch0.297 mm
Bezel width19 mm
Kensington Lock slotYes
Signal cable - analog1.5 m
Composit SYNCYes
SYNC on GreenNo
Analog Video Connector15-pin D-Sub
Native resolution1024 x 768
User controlsDigital
Lockable controlsNo
OSDYes
OSD languages6
Preset display modes12
User defined display modes7
VESA DDC capable2B
Power management capableYes - VESA DPMS
Power supplyUniversal Voltage (100 to 240 Vac)
Power cord1.8 m (detachable)
Tilt stand adjustment5 degrees forward, 20 degrees backward
JEIDA complianceNo
FCC B complianceYes
MPR-2 Emission complianceNo
MPR-3 Emission complianceNo
TCO'99 Environmental LabelYes
EU Directive 2002/95/EC (RoHS)Yes


Physical specifications
ParameterUnpackedPacked
Height13.64-inch (346.5 mm)16.73-inch (425.0 mm)
Width13.57-inch (344.6 mm)16.06-inch (408.0 mm)
Depth6.3-inch (160.0 mm)5.12-inch (130.0 mm)
Weight6.38 lb (2.9 kg)9.02 LB (4.1 kg)


Power requirements
  • Input voltage: 100 to 240 V ac +/- 10% (universal voltage)
  • Frequency: 50/60 Hz
  • Power consumption:
    • Maximum: <23 watts
    • Normal use: <23 watts typical
    • VESA standby: <2 watts
    • VESA suspend: <2 watts
    • VESA off: <1 watts at 100 V ac
    • Maximum earth leakage current:
      • <3.5 mA at 264 V
      • <0.25 ma at 100 V

Actual power consumption depends on the chosen display mode, the images displayed, and user control settings.



Ambient temperature and relative humidity
ParameterTemperatureRelative humidityAltitude
Operating10 to 35 deg. C10 to 80 %0 to 9,842 ft (3,000 m)
Shipping-20 to 60 deg. C5 to 95 %0 to 14,763 ft (4,500 m)
Storage-20 to 60 deg. C5 to 95 %0 to 9,842 ft (3,000 m)


Acoustics

Declared acoustical noise emissions LWAU = 4.5 bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779.



Packaging
  • One monitor
  • Attached tilt stand that can be removed
  • Attached 1.5-meter (4.92-foot) analog video signal cable (15-pin D to 15-pin D) that can be removed
  • Attached 1.8-meter (5.9-foot) audio signal cable
  • Power cord
  • CD containing multilingual user's guide, setup test pattern, and Windows installation file
  • Setup poster
  • Safety, troubleshooting, and warranty information

Note: With the exception of the models for U.S., Canada, and Japan, the power cords (based on the country order code) are supplied by distribution centers.



Warranty

Three years - Customer Carry-in or Mail-in using Rapid Replacement Service

  • Announce date: 11 Mar 2008 (Brazil)
  • Planned availability date: 14 Mar 2008 (Brazil)


Hardware compatibility

The Lenovo D153 monitor operates with system units or video adapters that generate a video output signal falling within the monitor's specifications:

ParameterMonitor
Native Resolution1024 x 768 pixels
Maximum pixel rate80 MHz

The monitor supports VESA Standard Timings as detailed in "Display Monitor Timing Specification," V1.8, dated September 17, 1998, for the following modes:

  • VGA: 640 x 480 at 60, 66, 72, and 75 Hz
  • SVGA: 800 x 600 at 60, 72, and 75 Hz
  • XGA: 1024 x 768 at 60, 70, and 75 Hz

This monitor supports the following modes:

  • 640 x 350 at 70 Hz
  • 720 x 400 at 70 Hz

Note: National language support is a function of the video adapter in the system unit and the application or support software.

Preset Display Modes
Addressability
(H x V Pixels)
Incoming video refresh rate
640 x 35070 Hz NI
640 x 48060 Hz NI
66 Hz NI
72 Hz NI
75 Hz NI
720 x 40070 Hz NI
800 x 60060 Hz NI
72 Hz NI
75 Hz NI
1024 x 76860 Hz NI
70 Hz NI
75 Hz NI
  • User modes: 10

The preset modes cannot be overwritten, but can be adjusted to personal choice. The new settings are stored automatically in one of the user locations and are recalled each time that mode is used. The factory settings for the mode in use, if any, can be restored by operating the reset control.

Information about the current incoming display mode is shown in the on-screen displays. However, it is displayed at the LCD panel's optimum refresh rate of 60 Hz.

It may be necessary to make some adjustments to the displayed image to compensate for variations in video signal timings. The user controls can be used to make these adjustments.

Software requirements
  • Microsoft Windows Me
  • Microsoft Windows 2000
  • Microsoft Windows XP


Ergonomics/Emissions/Environmental/Compatibility Approvals
  • Emissions: TCO'99
  • Power management: ENERGY STAR 4.0 (United States)
  • Environmental:
    • EU Directive 2002/95/EC (RoHS)
    • WEEE
  • Software: Windows Hardware Logo Program


Agency approvals - Safety/EMC
  • UL (United States)
  • IEC950 CB Report (International)
  • TUV-S (Argentina)
  • FCC B (United States)


Limitations
  • Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards, and application software.
  • Horizontal- and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
  • Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
  • This monitor provides FCC class B - residential installation - compliance in all display modes.
  • Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter.
  • Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug and Play to be effective.
  • Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.
  • A 15.0-inch (381.0 mm) flat-panel LCD monitor has nearly 2.4 million subpixel transistors laid over an area exceeding 107 square inches. Cost-effective manufacturing processes introduce a small number of defective subpixel transistors. The Lenovo D153 meets ISO 13406-2 Class II Pixel defect standard.
  • Use of 50% background is not recommended since some users may see undesirable visual effects on the screen.
  • The Auto-Setup "test pattern" can be used with Windows 98, Windows 2000, Windows XP, and DOS 7.0 only.


Additional Product information
Configuration files - Relevant files for your product
Service parts - Parts listing for your product
Publications - Instruction manual for your product

  • #Alias ID#:MIGR-69533
  • #Document ID#:PD003083
  • #Last Updated# :26-03-2014 02:35:44 p.m.
  • #Copyright#