Unsupported Browser Detected

The Lenovo Support website supports Microsoft Internet Explorer 10+, Mozilla Firefox 29+, Chrome 34+ and any other modern web browser.

      Intel USB3.0 Driver for Windows 7 (32-bit, 64-bit) - ThinkPad T431s

      Back#ProductName# - Downloads

      Name
      Operating System
      Version
      Released
      Download Now
      Checksum Data
      Intel USB3.0 Driver
      exe
      4.7 MB
      Windows 7 (32-bit)
      Windows 7 (64-bit)
      1.0.6.245
      3/29/2013
      README for Intel USB3.0 Driver
      txtreadme
      6 KB
      Windows 7 (32-bit)
      Windows 7 (64-bit)
      1.0.6.245
      3/29/2013

      This package installs the software (USB3.0 driver) to enable the following devices.

      Device name Device name in the Device Manager
      Intel(R) USB 3.0 eXtensible Host Controller Intel(R) USB 3.0 eXtensible Host Controller
      Intel(R) USB 3.0 Root Hub Intel(R) USB 3.0 Root Hub

      Note:

      • If this package has been installed, updating (overwrite-installing) this package will fix problems, add new functions, or expand functions as noted below.
      • This program is language independent and can be used with any language system.

       

      Contents
      Supported ThinkPad systems
      Supported Operating System
      Summary of changes
      Installation Instructions
      Determining which version is installed

       

      Supported ThinkPad Systems
      • ThinkPad T431s
      Supported Operating System
      • Microsoft Windows 7 32-bit, 64-bit
      Summary of Changes

      Where:

      • < > Graphics driver / Audio driver version numbers
      • [Important] Important update
      • (New) New function or enhancement
      • (Fix) Correction to existing function

      Version <1.0.6.245>

      • (New) Initial release for ThinkPad T431s

      Note:
      Please refer to the README file under the "File details" section for a complete list of changes fixed by this driver update.

      Installation Instructions

      Notes:

      • If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Version Information section.
      Manual Install

      This section assumes to use Internet Explorer and Windows Explorer.

      [Downloading file]

      1. Click once on the underlined file name. Once this is done, some pop-up windows will appear.
      2. Follow the instructions on the screen.
      3. In the window to choose Run or Save, click the Save button.
      4. Choose the folder you would like to download the file to and click the Save button. A different window will appear and the download will begin and complete. Once the download has completed, there may or may not be a message stating that the download completed successfully.

      [Extracting file]

      1. Make sure to be logged on with an administrator account.
      2. Locate the folder where the file was downloaded.
      3. Locate the file that was downloaded and double-click/double-tap it.
      4. Follow the instructions on the screen.
      5. In the Select Destination Location window, select Next. If you would like
        to select a different folder, select Browse.
      6. In the Ready to Install window, select Install. All the necessary files
        will be extracted to the folder selected in the step 9.

      [Installing files]

      1. Make sure the checkbox next to "Install ..... now" is checked and select Finish.
      2. Follow the instructions on the screen to complete installation and restart the computer.
        IMPORTANT: Make sure to restart the computer after installation.

      Finally delete the file saved in Step 4.

      Silent Install

      This is for system administrators' use only.

      1. Refer to the Manual Install section, and download and extract the file.
      2. In the step 11 of the Installing files section, uncheck the checkbox next
        to "Install ..... now", and then select Finish to cancel installation.
      3. At the command line, execute Setup.exe with the -s option.
        Example: [Path where the files were extracted]\Setup -s
      Determining which version is installed
      1. Select Start.
      2. Right-click Computer, and then select Properties.
      3. At the left pane, select Device Manager.
      4. Double-click/Double-tap the Universal Serial Bus Controllers category.
      5. Double-click/Double-tap any of the following devices.
        • Intel(R) USB 3.0 eXtensible Host Controller
        • Intel(R) USB 3.0 Root Hub
      6. Select the Driver tab.
      7. Check Driver Version.

      • Alias ID:
      • Document ID:DS034697
      • Last Updated :23 Jun 2014
      • © 2015 Lenovo