Print
login Account
Search

Intel Management Engine Firmware Update Tool (version 5.2.50.1039) - ThinkCentre M58, M58p

Name
Operating System
Version
Released
Download now
Intel Management Engine Firmware Update Tool

3889 KB
Windows Vista (32-Bit)
Windows Vista (64-Bit)
5.2.50.1039
9/21/2011
Installation Instructions for Intel Management Engine Firmware Update Tool

3 KB
Windows Vista (32-Bit)
Windows Vista (64-Bit)
5.2.50.1039
9/21/2011

AMT5.2.50.1039 is a security update for Intel AMT.  This utility updates the Intel(R) Management Engine's firmware of the local machine. This package is for use with systems that are AMT capable only.

Downloading the package
  1. Click the file link to download the file from the Web page.
  2. When prompted, select a drive and directory in which to save the downloaded file.
Supported systems

This update applies to the following Lenovo systems:

  • ThinkCentre M58 (type 6139, 6175, 6239, 6258, 6302, 6303, 7174, 7187, 7244, 7354, 7347, 7348, 7355, 7356, 7359, 7360, 7373, 7626, 7627, 7629, 7637, 7638, 7639, 8820, 8910, 9960)
  • ThinkCentre M58p (type 6136, 6137, 6138, 6209, 6234, 7220, 7188, 7345, 7346, 7357, 7358, 7483, 7484, 7479, 7628, 7630, 7635, 8336, 8338, 9961, 9964, 9965)
New in this release

This update is a security update for Intel AMT.

Before using this tool
  1. If you updated the AMT Firmware, you can NOT downgrade to the previous version.
  2. Make sure the Management Engine Interface Driver is installed on the system.
  3. During the update process, do NOT allow your system to power off.
  4. This tool supports Windows XP SP1/SP2, XP32/64, PE or Vista32/64, Windows 7.
  5. If you use LANDesk Management Suit to manage your AMT clients, strongly recommend you install the patch CR20525-88 on your LDMS server, you can get this patch from:
    • http://community.landesk.com/downloads/ServicePack/LD-88-AMT-CR20525-88.zip LDMS SP3 will include this patch.
Updating the firmware
  1. Download the update tool fw5.2.50.1039.exe from the support website.
  2. Run fw5.2.50.1039.exe in Windows. In Vista, if the "User Account Control" window appears, please select "Allow". The update will take several minutes to complete.
  3. After the update is complete, turn the system off and disconnect the power cord for at least 15 seconds.