Print
login Account
Search

PCI Express Mini Card for wireless WAN or mSATA solid-state drive removal and installation - ThinkPad T430u

For access, remove these FRUs in order:

 

Removal steps of PCI Express Mini Card for wireless WAN - Please perform the following steps as shown in the pictures below.

Detach the antenna RF connectors [1]. Then remove the screw [2].

Step
Screw (quantity)
Color
Torque
[2] M2 × 3.0 mm, wafer-head, nylon-coated (1) Black 0.181 Nm(1.85 kgfcm)

When installing: Plug the red cable into the jack marked MAIN, and the blue cable into the jack marked AUX on the card.

 

 

Removal steps of PCI Express Half Mini Card for wireless WAN - Please perform the following steps as shown in the pictures below.

Detach the antenna RF connectors [1]. Then remove the screw [2].

Step
Screw (quantity)
Color
Torque
[2] M2 × 3.0 mm, wafer-head, nylon-coated (1) Black 0.181 Nm(1.85 kgfcm)

When installing: Plug the red cable into the jack marked MAIN, and the blue cable into the jack marked AUX on the card.

 

 

Removal steps of mSATA solid-state drive - Please perform the following steps as shown in the pictures below.

Attention:

  • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.
  • Before removing the drive, have the user make a backup copy of all the information on it if possible.
  • Never remove the drive while the computer is operating or in suspend mode.

Remove the screw [1] that secures the mSATA solid-state drive.

Step
Screw (quantity)
Color
Torque
[1] M2 × 3.0 mm, wafer-head, nylon-coated (1) Black 0.181 Nm(1.85 kgfcm)

 


  • Alias ID:
  • Document ID: PD025933
  • Last Updated :6/17/2014
  • (c) 2014 Lenovo