Print
login Account
Search

ThinkVision L1951p 19-inch Wide Monitor - Overview

ThinkVision L1951p 19-inch Wide Monitor (2448)

ThinkVision L1951p 19-inch Wide Monitor (2448)
Machine Type - Models: 2448-HN6, 2448-HC6, 2448-HB6

Features and specifications

The ThinkVision L1951p 19-inch Wide Monitor (2448) features:

  • 19-inch widescreen monitor with 1440 x 900 resolution; 16:10 aspect ratio
  • VGA analog and DVI digital video input, including:
    • Dual input for attachment of two systems concurrently; the user selects which PC system image is display
  • Monitor tilt stand
  • Microsoft Windows 7 certified
  • Compliance includes:
    • TCO Display 5.0 rated
    • EPEAT GOLD rated
    • ENERGY STAR 5.0 (United States)
  • 65% recycled post-consumer plastic content
  • Supports attachment of optional ThinkVision Soundbar
FeatureSpecification
Monitor Size19.0 inch wide
Viewable image size19.0-inch (481 mm)
Maximum viewable area (W x H)408.2 x 255.2mm
Native resolution1440 x 900
Video inputVGA Analog, DVI-D Digital
Contrast ratio (typical)1000 : 1
Brightness (typical)250 cd/m2
Aspect Ratio16 : 10
Colors16.7 million
Viewing angle (typical)Horizontal: 170 degrees (at 10:1 contrast ratio); 170 degrees (@ 5:1 contrast ratio)
Vertical: 160 degrees (at 10:1 contrast ratio); 170 degrees (@ 5:1 contrast ratio)
Response time (typical)5 ms
Pixel pitch0.285 mm
SYNC TypeComposite/Separate TTL
SYNC on GreenNo
USB inputNone
USB outputNone
Bezel width (Side)15.5 mm
Tilt3 degrees forward
20 degrees backward
SwivelNone
Lift80mm (for models: HB6), 110mm (for models: HC6, HN6)
PivotNo
Soundbar AttachmentOptional ThinkVision Soundbar
VESA mount100 mm
Kensington Security Lock Slot (www.lenovo.com/support/security)Yes
User controlsDigital
Lockable controlsYes
OSDYes
OSD languages8
Preset display modes20
User defined display modes20
VESA DDC capable2B/CI
Power supplyUniversal
Power cord1.8 m
VGA Analog Cable1.8 m
DVI-D Cable1.8 m
ISO 9241-307 capableYes
Energy Star 5.0Yes
Power management capableYes - VESA DPMS
VESA DDC2B/CI
JEIDA compliance - APYes
FCC B complianceYes
TCO5.0 Environmental LabelYes
MPR-2 Emission complianceYes (covered by TCO5.0)
EU Directive 2002/95/EC (RoHS)Yes
EU Directive 2002/96/EC (WEEE)Yes
China RoHSYes
CCCYes
China Monitor Energy Efficiency Standard Tier 1Yes

Physical specifications - 2448-HB6
ParameterUnpackedPacked
Width17.36 inch (441 mm)16.54 inch (420 mm)
Depth6.11 inch (155 mm)20.12 inch (511 mm)
Height14.56 inch (370 mm)5.71 inch (145 mm)
Weight9.37lb (4.25 kg)13.0 lb (5.91 kg)
Weight - without lift/tilt stand6.90 lb (3.13 kg)- - - - - - - - - -

Physical specifications - 2448-HC6 and 2448-HN6
ParameterUnpackedPacked
Width17.36 inch (441 mm)17.72 inch (450 mm)
Depth6.11 inch (155 mm)20.28 inch (515 mm)
Height15.66 inch (398 mm)5.87 inch (149 mm)
Weight9.61 lb (4.36 kg)13.5 lb (6.13 kg)
Weight - without lift/tilt stand6.90 lb (3.13 kg)- - - - - - - - - -

Power requirements
  • Input voltage: 90 to 264 V ac
  • Frequency: 50/60 Hz
  • Power consumption:
    • Maximum: 23 watts
    • Typical: 19 watts typical*
    • Standby: <1 watts
    • Suspend: <1 watts
    • Off: < 0.5 watts at 100 V ac
    • Maximum earth leakage current:
      • < 3.5 mA at 264 Vac
      • < 0.25 mA at 100 Vac

* Typical power consumption is tested under normal performance application situation.



Ambient temperature and relative humidity
ParameterTemperatureRelative humidityAltitude
Operating0 to 40 deg.C10 to 80 %0 to 8,000 ft (2,438 m)
Shipping-20 to 60 deg. C5 to 95 %0 to 40,000 ft (12,192 m)
Storage-20 to 60 deg. C5 to 95 %0 to 40,000 ft (12,192 m)


Acoustics

Declared acoustical noise emissions LWAU = 4.5 bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779.



Packaging
  • One monitor
  • Attached 1.8-meter (5.9-feet) analog video signal cable (15-pin D to 15-pin D)
  • 1.8-meter (5.9-feet) DVI-D video signal cable
  • Power cord
  • A 3 -> 2 pin AC adapter (Japan only)
  • A Japanese proof of purchase card (Japan only)
  • A CD containing multilingual user's guide, setup test pattern, and .INF file
  • Setup guide
  • Safety and warranty information

Note: With the exception of the models for U.S., Canada, and Japan, the power cords (based on the country order code) are supplied by distribution centers.



Warranty

Three years - Customer Carry-in or Mail-in using Rapid Replacement Service

  • Announce date: 20 Oct 2009 (Worldwide and Topseller: Europe/Middle East/Africa)
  • Planned availability date: 23 Oct 2009 (Worldwide and Topseller: Europe/Middle East/Africa)


Hardware compatibility

The display is intended to operate with system units or video adapters that generate a video output signal falling within the following specification:

ParameterMonitor
Maximum resolution1440 x 900 pixels
Optimum resolution1440 x 900 pixels
Maximum pixel rate165 MHz (DVI)

The monitor supports VESA Standard Timings as detailed in "Display Monitor Timing Specification," Version 1.0, Revision 0.8, dated September 17, 1998, for the following modes:

  • VGA: 640 x 480 at 60, 72, and 75 Hz
  • SVGA: 800 x 600 at 56, 60, 72, and 75 Hz
  • XGA: 1024 x 768 at 60, 70, and 75 Hz
  • SXGA: 1280 x 1024 at 60, 70 and 75 Hz
  • WXGA+: 1440 x 900 at 60 and 75 Hz

This monitor also supports the following modes:

  • PAL VGA at 50 Hz
  • 640 x 350 at 70 Hz
  • 640 x 480 at 66 Hz
  • 720 x 400 at 70 Hz
  • 832 x 624 at 75Hz
  • 1152 x 864 at 75Hz

Note: National language support is a function of the video adapter in the system unit and the application or support software.

Preset Display Modes
Addressability
(H x V Pixels)
Incoming video refresh rate
640 x 35070 Hz
640 x 48060 Hz
66 Hz
72 Hz
75 Hz
720 x 40070 Hz
800 x 60056 Hz
60 Hz
72 Hz
75 Hz
832 x 62475 Hz
1024 x 76860 Hz
70 Hz
75 Hz
1152 x 86475 Hz
1280 x 72060 Hz
1280 x 102460 Hz
72 Hz
75 Hz
1360 x 76860 Hz NI
1440 x 90060 Hz* (Optimum Display Mode)
75 Hz
* This is the optimum display mode for the best displayed image. Reduced image quality may result if used in other modes due to the image scaling limitations of LCD monitor technology.
  • User modes: 20

The preset modes cannot be overwritten, but can be adjusted to personal choice. The new settings are stored automatically in one of the user locations and are recalled each time that mode is used. The factory settings for the mode in use, if any, can be restored by operating the reset control.

Information about the current incoming display mode is shown in the on-screen displays. However, it is displayed at the LCD panel's optimum refresh rate of 60 Hz.

It may be necessary to make some adjustments to the displayed image to compensate for variations in video signal timings. The user controls can be used to make these adjustments.

Compatibility
The ThinkVision L1951p 19-in Wide LCD Monitor (2448-HB6, 2448-HC6 and Topseller 2448-HN6) is supplied with a detachable 1.8-meter (5.9-feet) analog video signal cable and digital video signal cable (DVI-D).

This monitor has been tested with ThinkPad and ThinkCentre systems and is compatible with systems and graphics adapters which comply with the relevant parts of "VESA and industry standards and guidelines for computer display monitor timing" Version 1.0 Revision 0.8, adopted September 17, 1998. Supported display modes and number of colors are a function of the attaching system unit. The full range of display modes, refresh rates, and number of colors available with this monitor may not be available or supported with all combinations of system units, their operating systems, and application software. Implementation of monitor plug and play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective.

Software requirements
  • Microsoft Windows XP
  • Microsoft Windows Vista


Ergonomics/Emissions/Environmental/Compatibility Approvals
  • TCO 5.0 Environmental Label
  • MPRII
  • ISO 9241-307
  • Software: Microsoft Windows 7/Vista/XP
  • EU Directive 2002/96/EC - WEEE
  • EU Directive 2002/95/EC - RoHS
  • China RoHS
  • EPA
  • GS
  • e-Standby
  • REACH
  • EuP(3)

Standard: COMMISSION REGULATION (EC) No 1275/2008 (ANNEX I 2 point 2 for ITE product)



Agency approvals - EMI/Safety
  • UL (U.S.)
  • CSA (Canada)
  • IEC950 CB Report
  • NEMKO (Norway)
  • SEMKO
  • DEMKO (Denmark)
  • FIMKO (Finland)
  • TUV (Germany)
  • TUV-S (Argentina)
  • CCC (China)
  • NOM (Mexico)
  • SASO (Saudi Arabia)
  • GOST (Russia)
  • PSB (Singapore)
  • JEITA (Japan)
  • FCC B (U.S.)
  • IC (Canada)
  • CE (Europe)
  • KC (Korea)
  • VCCI Class B (Japan)
  • BSMI (Taiwan)
  • SABS (South Africa)
  • C-Tick (Australian, New Zealand)
  • Jordan


Limitations
  • Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards, and application software.
  • Horizontal- and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
  • Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
  • The number of colors shown in any display mode (up to a maximum of 16.7 million) is not limited by the monitor, but depends on the capabilities of the video adapter in the system unit.
  • This monitor provides FCC class B - residential installation - compliance in all display modes.
  • Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardwareand software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only afterappropriate signals are received from an attached system unit or video adapter.
  • Implementation of monitor Plug-And-Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug-And-Play to be effective.
  • Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.
  • A 19.0-inch Wide TFT monitor has nearly 4.0 million subpixel transistors laid over an area exceeding 162 square inches. Cost-effective manufacturing processes induce a small number of defective subpixel transistors. This monitor meets the ISO 9241-307 Pixel Defect.


Additional Product information
Configuration files - Relevant files for your product
Service parts - Parts listing for your product
Publications - Instruction manual for your product
Troubleshooting - Step-by-step instructions for solving common monitor issues
Lenovo ThinkVision Monitors ( www.lenovo.com/thinkvision ) - ThinkVision monitor information
Lenovo Support: Monitors - Reference Guide - A list of monitors
Lenovo Support: Monitor Accessories - Reference Guide - A list of monitor accessories (stands, arms, displayport cables, cable locks, soundbars)
Lenovo Support: DisplayPort Cables - Product and compatibility information for DisplayPort monitor cables
Lenovo Support: Graphic Cards - Reference Guide - A list of graphic cards for desktop and workstation systems
Lenovo Support: Accessories - Reference Guide - A list of accessories for notebook, desktop, workstation, server accessories
www.lenovo.com/accessoriesguide - Additional information on options and accessories, including the Option Compatibility Matrix (OCM)
Personal Systems Reference (PSREF) - Comprehensive information on the features and technical specifications on Lenovo products