Print
login Account
Search

Ultrabay device removal and installation - ThinkPad Z60m, Z61e, Z61m, Z61p

Ultrabay device removal movie
Ultrabay device installation movie

To install a device in the Ultrabay Slim or Ultrabay Enhanced, do as follows:

  1. Turn off the computer; then disconnect the ac adapter and all cables from the computer.
  2. Slide the bay latch to pop out the handle.
    Slide the latch to pop out the handle.

  3. Pull the handle until it stops (1); then pull out the Ultrabay Slim or Ultrabay Enhanced device (2).
    Pull the handle, and pull out the device.

  4. Insert the replaceable device into the bay; then press the device firmly into the connector.
    Insert the replaceable device, and press into the connector.

  5. Return the handle to its place by pressing it in.
    Note: Be sure to press the handle to make sure that it is housed in its position. If the handle is improperly housed, it is vulnerable to damage.
    Press the handle to make sure that it is housed in its position.

Purchase parts online