|View battery removal movie|
|View battery installation movie|
Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode.
Removal steps of battery pack
- Turn off the computer, or enter hibernation mode. Then disconnect the AC adapter and all cables from the computer.
Note: If you are using a PC Card, the computer may not be able to enter hibernation mode. If this happens, turn off the computer.
- Close the computer display, and turn the computer over.
- Unlock the battery release lever (1). Holding the battery release lever in the unlocked position (2), remove the battery pack in the direction shown by arrow (3).
When installing: Install the battery pack along the slide rails of the slot. Then make sure that the battery release lever is in the locked position.