Print
login Account
Search
Unsupported Browser Detected: Dear user, the browser you’re currently using is not supported by this website. Please click here for more information about the browsers we support and how to obtain them.

Hard disk drive slot cover, hard disk drive (HDD) and HDD rubber rails or Solid state drive (SSD) and storage converter - Thinkpad T510, T510i, W510

Attention:

  • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.
  • Before removing the drive, have the user make a backup copy of all the information on it if possible.
  • Never remove the drive while the system is operating or is in suspend mode.
Hard disk drive slot cover, hard disk drive (HDD) and HDD rubber rails or Solid state drive (SSD) and storage converter removal and installation.

For access, remove this FRU:

Note: Loosen the screw [1], but do not remove it.

Please perform the following steps as shown in the pictures below.

Removal steps of hard disk drive slot cover, HDD and HDD rubber rails or SSD and storage converter.

HDD and HDD rubber rails:

Removal steps of HDD and HDD rubber rails

SSD and storage converter:

74446_hdd2.gif

When installing: Make sure that the SSD connector or HDD connector is attached firmly.

Purchase parts online

  • Alias ID: MIGR-74446
  • Document ID: PD005412
  • Last Updated :6/17/2014
  • (c) 2014 Lenovo