For access, remove this FRU in order:
Note: Loosen the screws , but do not remove them.
|3||M2 x 6 mm, bind-head, nylon-coated (2)||Black||0.181 Nm (1.85 kgfcm)|
Push down the keyboard a little toward the arrow , and then lift up the keyboard in the direction of .
Lift the keyboard a little in the direction shown by arrow , and then detach the connector .
Attach the keyboard connector.
Attach the keyboard so that the keyboard edges [a] are under the frame as shown in this figure.
To make sure that the front side of the keyboard is housed firmly, gently press the keys with your thumbs and try to slide the keyboard toward you.
Secure the keyboard by tightening the screws from the bottom side of the computer.