Print
login Account
Search
Unsupported Browser Detected: Dear user, the browser you’re currently using is not supported by this website. Please click here for more information about the browsers we support and how to obtain them.

LCD rear cover and wireless antenna cables removal and installation - ThinkPad X200 Tablet, X201 Tablet

For access, remove these FRUs in order:

 

Wireless antenna cables removal

Please perform the following steps as shown in the pictures below.

Note: Step [1] is only for Tablet Digitizer models. For Touch panel and Tablet Digitizer models, skip step [1].

Wireless antenna cables removal step 1 and 2
Wireless antenna cables removal step 1 and 2 screw description

Wireless antenna cables removal step 3

In step [4], release the antenna cables from the cable guides of the rear cover.

Wireless antenna cables removal step 4 and 5

Wireless antenna cables removal step 6 and 7

 

LCD rear cover removal

Please perform the following steps as shown in the pictures below.

Remove the center latch from the LCD rear cover.

LCD rear cover removal step 1 and 2
LCD rear cover removal step 1 screw description

 

Wireless antenna cables installation

When installing: Place the antenna assembly as shown in this figure.

[a]Wireless WAN antenna, AUX (blue)
[b]Wireless LAN antenna, AUX (black)
[c]Wireless USB antenna (yellow)
[d]Wireless WAN antenna, MAIN (red)
[e]Wireless LAN antenna, MAIN (gray)
[f]MIMO antenna (white)

Wireless antenna cables installation picture

Attention: As you route the antenna cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

Purchase parts online

  • Alias ID: MIGR-71455
  • Document ID: PD004678
  • Last Updated :6/17/2014
  • (c) 2014 Lenovo