Print
login Account
Search

Hard disk drive (HDD) cover, HDD, and HDD rubber rails or solid state drive (SSD) and storage converter removal and installation - ThinkPad X200 Tablet, X201 Tablet

For access, remove this FRU:

Attention:

  • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.
  • Before removing the drive, have the user make a backup copy of all the information on it if possible.
  • Never remove the drive while the system is operating or is in suspend mode.

 

Hard disk drive (HDD) or solid state drive (SSD) removal and installation

Please perform the following steps as shown in the pictures below.

Hard disk drive (HDD) cover removal step 1, 2 and 3
Hard disk drive (HDD) cover removal step 1 screw description

Hard disk drive removal step 4

Hard disk drive removal step 5

When installing: Make sure that the HDD connector or SSD connector is attached firmly.

 

HDD rubber rails removal and installation

Please perform the following step as shown in the picture below.

HDD rubber rails removal step 6

When installing: The rubber rails on the hard disk drive must be attached to the replacement drive. Otherwise the drive cannot be installed properly.

 

Solid state drive (SSD) and storage converter removal and installation

Please perform the following step as shown in the picture below.

Solid state drive (SSD) and storage converter removal

When installing: When you install the SSD in the storage converter, do as follows.

Solid state drive (SSD) and storage converter installation

Purchase parts online

  • Alias ID: MIGR-71430
  • Document ID: PD003740
  • Last Updated :6/17/2014
  • (c) 2014 Lenovo