Print
login Account
Search

Base cover and speaker assembly removal and installation - ThinkPad X200 Tablet, X201 Tablet

For access, remove these FRUs in order:

Base cover and speaker assembly removal

Please perform the following steps as shown in the pictures below.

Remove the speaker assembly from the base cover assembly.

Base cover and speaker assembly removal step 1 and 2

 

Base cover and speaker assembly installation

When installing: Route the speaker cables along the cable guides as shown in this figure.

Speaker cables routing picture

 

Applying labels to the base cover:

The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels:

[2]Homologation label
[12]Product label

Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.

[1]Windows license label (COA)
[3]MAC address label
[4]IMEI label
[5]Vodafone label
[6]China modem label
[7]FCC-ID label for wireless WAN
[8]FCC-ID label for wireless LAN
[9]SIRIM label
[10]FCC-ID label for digitizer
[11]Serial number label

For some models, you need to apply two or three FCC labels, [7] or [8] and [10]. Check the old base cover; if it has two or three FCC labels, find duplicates of them in the label kit and apply them to the new base cover.

For the location of each label, refer the following figure:

Location of base cover label

For some models, you need to apply one or two FCC labels, [7a] and [10]. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover.

For the location of each label, refer the following figure:

basecover_x201t.jpg

Purchase parts online