Print
login Account
Search

Palm rest assembly removal and installation - IdeaPad S9e and S10e

For access, remove:

  1. Battery pack

Removal steps of palm rest assembly

Palm rest assembly

StepScrew (quantity)ColorTorque
[1]M2 × 6 mm, wafer-head, nylon-coated (5)Black0.181 Nm(1.85 kgfcm)

Palm rest assembly

Palm rest assembly

Turn the palm rest over, and then disconnect the cable from the flip-lock ZIF connector.

Palm rest assembly

When installing:

  1. Attach the touch pad cable to the flip-lock ZIF connector on the palm rest.
    Palm rest assembly
  2. Attach the touch pad cable to the flip-lock ZIF connector on the system board.
  3. Attach the microphone connector firmly to the system board.
  4. Attach the front side of the palm rest to the front side of the base cover.
  5. Press the left and right top edges of the palm rest to fit it into place.Palm rest assembly
  6. Close the LCD cover and turn the computer over. Then fasten the four screws to secure the palm rest.

 

 

Purchase parts online

  • Alias ID:MIGR-71365
  • Document ID:PD012133
  • Last Updated :3/26/2014 2:38:24 PM
  • (c) 2014 Lenovo