Servicer Login
login Account
Unsupported Browser Detected: Dear user, the browser you’re currently using is not supported by this website. Please click here for more information about the browsers we support and how to obtain them.

M58's has an "Intel(R) AMT" menu in BIOS Setup Utility.

Applicable Countries/Regions
Service Hints & Tips

M58 (non-vPro) models, has an "Intel(R) AMT" menu in the BIOS Setup Utility. Both M58p (vPro) and M58 (non-vPro) have an AMT menu in the BIOS Setup, which is different from the M57p and M57.

Affected configurations

The above symptom may occur on the following systems:

  • ThinkCentre M58 (type 6139, 6175, 6239, 6258, 6302, 6303, 7174, 7244, 7348, 7354, 7355, 7360, 7373, 7626, 7627, 7628, 7637, 7638, 7639, 7187, 7359, 8820, 8910, 9960)
  • ThinkCentre M58p (type 6136, 6137, 6138, 6209, 6234, 7188, 7220, 7346, 7347, 7356, 7357, 7358, 7484, 7629, 7635, 8338, 9964, 9965, 7345, 7479, 7483, 7630, 9961)

Additional Information:

Intel Management Engine (ME) Firmware will provide different functions automatically according to the CPU on the system:

- M58p (vPro model), which use vPro CPU, ME will provide AMT 5.0 function.

- M58 (non-vPro model), which use non-vPro CPU, ME will provide Intel Standard Manageability.

The function of Intel Standard Manageability is similar with AMT 3.2, which needs an AMT menu in BIOS to configure.

Intel(R) AMT menu shows as below:


The function of the settings:

Items Description Default
Intel (R) AMT To Enable/Disable Intel AMT. If AMT disabled: 1.hide the CTRL-P prompt so there would not be any method to provision iAMT 2.would not look for setup.bin on a USB key so the MEBX will not be provisioned 3.BIOS issue an unprovision. At next boot, an unprovision prompt will be shown after POST. 4.Disable SOL/IDER Enable
MEBx Reset To reset AMT configuration to factory settings without entering MEBx Disable
Press CTRL-P to enter MEBx User can or can not enter MEBx by pressing CTRL-P Enable
Intel (R) AMT SKU Intel ME FW SKU AMT+ QST+ ASF2 ( Show only)
ME Firmware Version Intel ME FW version
COM Port Address If SOL enabled, the SOL Configuration will be shown. SOL: Serial Over LAN, a feature of AMT. SOL
Console Type Console Type of SOL COM port VT100+
Continue C.R. after POST Enable Console Redirection after OS has loaded On


None. Do not replaced any hardware for this issue.

This is working as designed and expected behavior.

  • Alias ID: SF09-D0013
  • Document ID: HT052092
  • Last Updated :17 Jun 2014
  • (c) 2014 Lenovo