Skriv
login Konto
Search

Cisco Systems Mini PCI Wireless LAN driver for Windows 98/Me/2000/XP - ThinkPad

Namn
Operativsystem
Version
Utgivet
Ladda ner nu
Cisco Systems Mini PCI Wireless LAN driver
exe
14725 KB
Windows XP (32-bit)
3.8.26.01
8/27/2004
README for Cisco Systems Mini PCI Wireless LAN driver

12.269 KB
Windows XP (32-bit)
3.8.26.01
8/27/2004

The Wireless LAN driver enables or updates the Wireless LAN function of the following ThinkPad computers with the following adapters: - Cisco Wireless LAN Mini PCI Card.

 

Contents
Supported ThinkPad Systems
Supported Operating Systems
Summary of changes
Installation instructions
Determining which version is installed
Tip for LEAP Authentication

 

Supported ThinkPad Systems

 

  • ThinkPad R32 (*2)
  • R40 (*2)
  • T30 (*1), T40 (*2), T40p (*3), T41 (*2), T41p (*3), T42(*2), T42p(*3)
  • X30 (*2), X31 (*2)

Note:

  • (*1) Only the following T30 models support the Windows Me: 2366/2367-x1x, x2x, x3x, x4x, x5x, A6x and A7x except for M1x, M2x, M3x, M4x and M5x.
  • (*2) Windows Me is not supported.
  • (*3) Supports Windows 2000/XP only.
  • To keep software compatibility, if you use IBM Access Connections, please update it to the version 3.30 or later.

 

Supported Operating Systems
  • Microsoft Windows XP
  • Microsoft Windows 2000
  • Microsoft Windows Me
  • Microsoft Windows 98/98 SE

 

Summary of changes

Driver version information:

  • Package version - 3.8.26.01
  • Driver version - 3.8.26
  • Firmware version - 5.41
  • Utility version - 6.03.011

Version 3.8.26.01

  • (Fix) When you run IWSETUP.EXE to install this package, you will receive the error message.
    Note: Only the installation related part has been changed with this release. You do not need to update the driver, if you already updated the driver to version 3.8.26 successfully.

Note:
Please refer to the README file under the "File details" section for a complete list of changes fixed by this driver update.

 

Installation instructions

Note: ThinkPad Software Installer provides install and uninstall wizards for this package for the following operating systems:

  • Microsoft Windows 98 and 98SE
  • Microsoft Windows Me
  • Microsoft Windows 2000
  • Microsoft Windows XP

Caution: This Driver will automatically update your card's Firmware upon installation and during reboot of the system. Do not power off the system at any time during Driver installation and reboot to prevent the card's Firmware from corruption.

Windows 98/Me

  1. Start Windows 98/Me.
  2. Extract this package onto the hard disk drive.
  3. Click Start, select Settings, and then click Control Panel.
  4. Double-click the System icon. For Windows Me, it may be necessary to click View all Control Panel options.
  5. Click the Device Manager tab.
  6. Click the + mark to expand Network adapters or Other devices.
  7. Right-click Cisco Systems PCI Wireless LAN Adapter in the Network adapters section or PCI Network Controller in the Other devices section and then click Properties.
  8. Click the Driver tab.
  9. Click the Update Driver button.
  10. For Windows Me only, select Specify the location of the driver (Advanced).
  11. Click the Next button in Update Device Driver Wizard dialog box.
  12. For windows 98 only, select Search for a better driver than the one your device is using now.(Recommended) and then click Next.
  13. Select Specify a location: only.
  14. Specify the path with the full path name where you extracted the package in step 2 in the Specify a location: box and then click Next.
  15. For Windows 98 only, click Next.
  16. Click Next. The driver installation starts.
  17. Click Finish when the installation completes.
  18. Click Yes when prompted to restart the computer.

Windows 2000

  1. Start Windows 2000.
  2. Extract this package onto the hard disk drive.
  3. Click Start, select Settings, and then click Control Panel.
  4. Double-click the System icon.
  5. Click the Hardware tab.
  6. Click the Device Manager button.
  7. Click the + mark to expand Network adapters or Other devices.
  8. Right-click Cisco Systems PCI Wireless LAN Adapter in the Network adapters section or Network Controller in the Other devices section and then click Properties.
  9. Click the Driver tab.
  10. Click the Update Driver button.
  11. Click Next in the Upgrade Device Driver Wizard dialog box.
  12. Select Search for a suitable driver for my device (recommended) and then click Next.
  13. Select Specify a location only in Optional search locations:.
  14. Click Next button.
  15. Specify the path to sub-directory \PCC-MPI\9x-Me-2K with the full path name where you extracted the package in the step 2 in Copy manufacturer's files from:.
  16. Click OK.
  17. Click Next. After this step, the installer may display a "Digital Signature not found" message. Click Yes if this message appears. The driver installation starts.
  18. Click the Finish button when the installation completes.
  19. Restart the computer.

Windows XP

  1. Start Windows XP.
  2. Extract this package onto the hard disk drive.
  3. Click Start and then click Control Panel.
  4. Click the Performance and Maintenance icon and then click the System icon.
  5. Click the Hardware tab.
  6. Click the Device Manager button.
  7. Click the + mark to expand Network adapters or Other devices.
  8. Right-click Cisco Systems PCI Wireless LAN Adapter in the Network adapters section or Network Controller in the Other devices section and then click Properties.
  9. Click the Driver tab.
  10. Click the Update Driver button.
  11. Select Install from a list or specific location (Advanced) and then click Next.
  12. Select Search for the best driver in these locations.
  13. Select Include this location in the search only.
  14. Specify the path to sub-directory \PCC-MPI\XP with the full path name where you extracted the package in the step 2 in Copy manufacturer's files from: and then click Next. The Driver installation starts. After this step, the installer may display a "Digital Signature not found" message. Click Continue Anyway if this message appears.
  15. Click the Finish button when the installation completes.
  16. Restart the computer.

Aironet Client Utility

  1. Start Windows.
  2. Click Start and then click Run.
  3. In the Run dialog window, specify IWSETUP.EXE with the full path name where you extracted the package in the step 2, and click OK.
  4. Follow the instructions on the screen.
  5. Restart the system.

Firmware

  1. Open Aironet Client Utility.
  2. Click the Load Firmware icon.
  3. Specify the file name of the Firmware with the full path name where you extracted the package in the step 2, and click OK.

    File Name: pcx504b.img
    Sub-directory: \PCC-MPI\Firmware

 

Determining which version is installed

To check the version of the Utility Software that is installed on your system

  1. Open the Aironet Client Utility.
  2. Click Help, then click About Aironet Client Utility.

To check the version of the Firmware /device driver that is installed on your system:

  1. Open the Aironet Client Utility.
  2. Click the Status icon.
  3. Check the Firmware Version/NDIS Driver Version.

 

Tip for LEAP Authentication

To utilize LEAP authentication, it is required to install Cisco Aironet Client Utility(ACU) with the LEAP authentication feature selected. Run the SETUP.EXE to install ACU and choose the LEAP option at the Select Options menu of the installer.


  • Alias ID: MIGR-42683, SYD0-01CB396
  • Document ID:DS015897
  • Last Updated :2014-06-23
  • (c) 2014 Lenovo