متصفح غير معتمد

صفحة لينوفو تدعو جوجل كروم,انتيرنيت اكسبلورير وموزيلا

      Intel Matrix Storage Manager for Windows XP - ThinkPad SL300, SL400, SL400c, SL500 and SL500c

      عودة#ProductName# - التنزيلات

      اسم
      نظام التشغيل
      الإصدار
      عرض للبيع
      تحميل الآن
      Checksum Data
      Intel Matrix Storage Manager
      exe
      524.2 KB
      Windows XP (32-bit)
      8.8.0.1009
      6/29/2009
      README for Intel Matrix Storage Manager
      txtreadme
      7.29 KB
      Windows XP (32-bit)
      8.8.0.1009
      6/29/2009
      This package installs the Intel SATA controller AHCI Driver to enable Intel(R) ICH9M-E SATA AHCI Controller.

      Device name in the Device Manager
      ---------------------------------------------------
      Intel(R) ICH9M-E/M SATA AHCI Controller

      The following systems are supported:
      - ThinkPad SL300, SL400, SL400c, SL500, SL500c
      Additional information
      Summary of changes
      Installation instructions
      Determining which version is installed

      Summary of changes

      Version 8.8.0.1009

      • (New) Update Intel SATA controller AHCI driver

      Version 8.7.0.1007

      • (New) Update Intel SATA controller AHCI driver

      Version 8.6.0.1007

      • (New) Update Intel SATA controller AHCI driver

      Version 8.1.0.1001

      • (New) (Initial release) Support for ThinkPad SL300, SL400, SL500
      Installation instructions
      Notes: If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Version Information section.

      Manual Install

      1. Start Windows XP and logon with administrative privileges.
      2. Double-click the driver package to extract it to your hard drive. The default location is C:\DRIVERS\WIN\IMSM.
      3. Click Start, then click Run...
      4. Specify 2ksetup.exe with the full path name where you extracted the package in the step 2, and click OK. Example: C:\DRIVERS\WIN\IMSM\2KSETUP.EXE
      5. Follow the instructions on the screen.
      6. Click Finish to reboot the system to complete the installation.

       

      Unattended installation

      Note: This is for system administrators' use only.

      1. Start Windows XP and logon with administrative privileges.
      2. Double-click the driver package to extract it to your hard drive. The default location is C:\DRIVERS\WIN\IMSM.
      3. Click Start, then click Run...
      4. Specify 2KSETUP.EXE 2KSETUP.INI with the full path name where you extracted the package in the step 2, and click OK. Example: C:\DRIVERS\WIN\IMSM\2KSETUP.EXE 2KSETUP.INI
      5. Follow the instructions on the screen.
      6. Click Finish to reboot the system to complete the installation.
      Determining which version is installed
      1. Click Start, then click Control Panel.
      2. Click Performance and Maintenance, then click System.
      3. Click Hardware, then click Device Manager.
      4. Click the + sign in front of the IDE ATA/ATAPI controllers category.
      5. Double-click "Intel(R) ICH9M-E/M SATA AHCI Controller".
      6. Click the 'Driver' tab. Then you will see the Driver Version.

      • Alias ID: MIGR-69993, MIGR-69993-KR
      • Document ID:DS002600
      • Last Updated :23 Jun 2014
      • © 2015 Lenovo