Print
login Cuenta
Search

Intel Matrix Storage Manager for Windows XP - ThinkPad SL300, SL400, SL400c, SL500 and SL500c

Nombre
Sistema Operativo
Versión
liberado
Descargar Ahora
Intel Matrix Storage Manager
exe
524.1953125 KB
Windows XP (32-bit)
8.8.0.1009
29/06/2009
README for Intel Matrix Storage Manager
txtreadme
7.294921875 KB
Windows XP (32-bit)
8.8.0.1009
29/06/2009
This package installs the Intel SATA controller AHCI Driver to enable Intel(R) ICH9M-E SATA AHCI Controller.

Device name in the Device Manager
---------------------------------------------------
Intel(R) ICH9M-E/M SATA AHCI Controller

The following systems are supported:
- ThinkPad SL300, SL400, SL400c, SL500, SL500c
Additional information
Summary of changes
Installation instructions
Determining which version is installed

Summary of changes

Version 8.8.0.1009

  • (New) Update Intel SATA controller AHCI driver

Version 8.7.0.1007

  • (New) Update Intel SATA controller AHCI driver

Version 8.6.0.1007

  • (New) Update Intel SATA controller AHCI driver

Version 8.1.0.1001

  • (New) (Initial release) Support for ThinkPad SL300, SL400, SL500
Installation instructions
Notes: If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Version Information section.

Manual Install

  1. Start Windows XP and logon with administrative privileges.
  2. Double-click the driver package to extract it to your hard drive. The default location is C:\DRIVERS\WIN\IMSM.
  3. Click Start, then click Run...
  4. Specify 2ksetup.exe with the full path name where you extracted the package in the step 2, and click OK. Example: C:\DRIVERS\WIN\IMSM\2KSETUP.EXE
  5. Follow the instructions on the screen.
  6. Click Finish to reboot the system to complete the installation.

 

Unattended installation

Note: This is for system administrators' use only.

  1. Start Windows XP and logon with administrative privileges.
  2. Double-click the driver package to extract it to your hard drive. The default location is C:\DRIVERS\WIN\IMSM.
  3. Click Start, then click Run...
  4. Specify 2KSETUP.EXE 2KSETUP.INI with the full path name where you extracted the package in the step 2, and click OK. Example: C:\DRIVERS\WIN\IMSM\2KSETUP.EXE 2KSETUP.INI
  5. Follow the instructions on the screen.
  6. Click Finish to reboot the system to complete the installation.
Determining which version is installed
  1. Click Start, then click Control Panel.
  2. Click Performance and Maintenance, then click System.
  3. Click Hardware, then click Device Manager.
  4. Click the + sign in front of the IDE ATA/ATAPI controllers category.
  5. Double-click "Intel(R) ICH9M-E/M SATA AHCI Controller".
  6. Click the 'Driver' tab. Then you will see the Driver Version.