Fale sobre seu produto para receber suporte personalizado!
Nenhum Produto SelecionadoSelecione Produto
BIOS Update Bootable CD for Windows 8.1 (64-bit), 8 (64-bit), 7 (32-bit, 64-bit) - ThinkPad T440, T440s

This package provides the ISO image file of UEFI BIOS which is compatible with CD/DVD/BD writing software to create the CD/DVD/BD for the UEFI BIOS update. Hereafter the CD/DVD/BD for the UEFI BIOS update is called as "BIOS Update CD"

The BIOS Update CD can boot the computer disregarding the operating systems and update the UEFI BIOS (including system program and Embedded Controller program) stored in the ThinkPad computer to fix problems, add new functions, or expand functions as noted below.

For that purpose, it is necessary to have the CD/DVD/BD writing software (with CD/DVD/BD creation function from the ISO image file) prepared separately.

Also, any one of the following types of CD-RW, CD-RW & DVD Combo, DVD, DVD Multi, BD or other optical drives should be prepared. (Hereafter these drives are called as "optical drive".)

  • USB

Note:

  • This program is language independent and can be used with any language system.
  • Please create the CD/DVD from the ISO image file and install it. The contents of the BIOS Update CD cannot be shown by Windows Explorer.

Use the links below to obtain the BIOS and Embedded Controller files in other file formats:

 

Contents
Supported ThinkPad System
Supported Operating Systems
Summary of changes
Notes
Creating the BIOS update disc
Before Updating the UEFI BIOS
Update UEFI BIOS
Initializing UEFI BIOS
Determining which version is installed

 

Supported ThinkPad System
  • ThinkPad T440, T440s
Supported Operating Systems
  • Microsoft Windows 8.1  64-bit
  • Microsoft Windows 8 64-bit
  • Microsoft Windows 7 32-bit, 64-bit
Summary of Changes

Where:

  • <  > Package version
  • UEFI: UEFI BIOS version
  • ECP: Embedded Controller Program version
  • [Important] Important update
  • (New) New function or enhancement
  • (Fix) Correction to existing function

Version 2.25
UEFI: 2.25 / ECP: 1.09

  • (New) Added support for the UEFI DriverOrder feature.
  • (New) Updated the Diagnostics module to version 2.03.00.
  • (New) Added support for Intel Graphics Memory selection in ThinkPad Setup.
  • (New) Added support for the new on-board memory (Hynix).
    Note:
    If the UEFI BIOS has been updated to version 2.25 or higher on the
    system with the new on-board memory (Hynix) installed, it is no longer
    able to roll back to the version before 2.25 with the system.
  • (Fix) Fixed an issue where UEFI KeyShiftState was not correctly returned for some keys.
  • (Fix) Fixed an issue where SMBIOS type 15 structure (System Event Log) was incorrect.
  • (Fix) Fixed issues for some specific USB devices.
  • (Fix) Fixed an issue that did not keep Fn Key Lock state after resuming normal
    operation from Intel Rapid Storage Technology.

Version 2.24
 UEFI: 2.24 / ECP: 1.09

  • (Fix) Fixed an issue where ThinkVantage Hardware Password Manager might fail to register the computer.
    Note:
    In case that your computer has been registered by ThinkVantage Hardware
    Password Manager with the UEFI BIOS version 2.23 (GJET73WW) or earlier,
    you should deregister your computer from ThinkVantage Hardware Password
    Manager before updating the UEFI BIOS version 2.24 or higher. Consult
    your IT administrator or the manual of ThinkVantage Hardware Password
    Manager about how to deregister the computer.

Version 2.23
 UEFI: 2.23 / ECP: 1.09

  • (Fix) Fixed an issue that might fail to boot the computer remotely.
    Note: From 1.5.50, Intel Boot Agent doesn't support PXE option 61.
  • (Fix) Fixed an issue where PCILAN device might be excluded from the boot order after LoadDefault by WMI.

Note:
Please refer to the README file under the "File details" section for a complete list of changes fixed by this driver update.

Notes
  • If the UEFI BIOS has been updated to version 2.10 or higher, it is no longer able to roll back to the version before 2.10 for Intel BIOS Guard support.
  • Be aware that the OS Optimized Defaults option in the Restart menu of ThinkPad Setup should not be normally changed. Lenovo recommends to use the factory
    default setting for it, as follows.
  •   OS Optimized Defaults
    For Windows 8.1/8 64-bit Preload models
    [Enabled]
    For Windows 7 [Disabled]

    To install the retail edition of Windows 8 64-bit, the OS Optimized Defaults option should be [Enabled].

    If the OS Optimized Defaults setting is changed, Setup Default by the F9 key will not load the same default configuration, as follows.
    Furthermore, by the condition of Operating System installation, the computer may not be booted due to the setting change.

    If your computer runs satisfactorily now, you have no need to change the OS Optimized Defaults option.
    If you need to change the setting, consider well the effect of the setting change.

    "OS Optimized Defaults" setting [Disabled] case [Enabled] case
    Security

    UEFI BIOS Update Option

    • Secure RollBack Prevention
    Disabled Enabled

    Secure Boot

    • Secure Boot
    Disabled Enabled
    Startup
    UEFI/Legacy Boot [Both] [UEFI Only]
    UEFI/Legacy Boot Priority [Legacy First] (Not shown)
    CSM Support [Yes] [No]

    By the OS to be newly installed, you need to change the OS Optimized Defaults option, and load default configuration.

  1. Enter the ThinkPad Setup menu by following steps in [Checking On ThinkPad
    Setup] in the DETERMINING WHICH VERSION IS INSTALLED section.
  2. Select Restart, then select OS Optimized Defaults and press Enter.
  3. Select the following setting and press Enter.
    [Enabled] (for Windows 8 64-bit)
    [Disabled] (for Windows 8 32-bit or Windows 7)
  4. Press the F9 key to load default configuration.
  5. Select Yes.
  6. Press the F10 key to save default configuration and exit.
  7. Select Yes.
    The computer will be restarted automatically.
  8. Lenovo recommends to install the USB 3.0 driver for Windows (Version 1.0.4.225 or higher) prior to updating the UEFI BIOS. Because the UEFI BIOS requires the
    modification in the USB 3.0 driver to fix USB 3.0 related issues.

    (Caution)
    If both the Secure Boot option is Enabled and UEFI Secure Boot in the Main menu of ThinkPad Setup is shown as Off, restoring Factory Keys is needed. Do the following to restore Factory Keys.

  1. Enter the ThinkPad Setup menu by following steps in [Checking On ThinkPad
    Setup] in the DETERMINING WHICH VERSION IS INSTALLED section.
  2. Select Security, then select Secure Boot.
  3. Select Restore Factory Keys, and press Enter.
  4. Select Yes to restore Factory keys.
  5. Press the F10 key to save configuration and exit.
  6. Select Yes.
    The computer will be restarted automatically.
  • To enable 30 Day standby feature of ThinkVantage Power Manager, the computer has to disable waking computer by
    network adapters and USB devices. Uncheck the checkbox next to "Allow this device to wake the computer" in the Power
    Management tab for each device in Device Manager.
  • You should install the CD/DVD/BD writing software which supports CD/DVD/BD creation function from the ISO image file
    to create the BIOS Update CD.
  • To boot the computer from the BIOS Update CD, you should have any one of the
    following types of optical drives.
    - USB
    Any types of other optical device like ExpressCard device are not supported.
  • The contents of the BIOS Update CD can not be shown by Windows Explorer.
Creating the BIOS update CD

This section assumes to use Internet Explorer and Windows Explorer.

[Downloading file]

  1. Click once on the underlined file name. Once this is done, some pop-up windows will appear.
  2. Follow the instructions on the screen.
  3. In the window to choose Run or Save, click the Save button.
  4. Choose the folder you would like to download the file to and click Save. A different window will appear and the download will begin and complete. Once the download has completed, there may or may not be a message stating that the download completed successfully.

[Creating BIOS Update CD]

  1. Prepare a computer with an optical drive installed and a blank CD/DVD/BD disc, and make sure the CD/DVD/BD writing software is installed into the computer.
  2. Locate the folder where the file was downloaded.
  3. Locate the file ending in ".ISO" that was downloaded, then double-click it. A writing software will open.
  4. Follow the instructions on the screen to finish writing and complete creating BIOS Update CD.

Finally delete the file saved in the step 4.

Before Updating the UEFI BIOS

Boot capability with [Legacy Only] setting in the ThinkPad Setup is no longer supported with this version of BIOS Update CD. To boot the BIOS Update CD for the BIOS update, the Legacy Only setting should not be selected in the UEFI/Legacy Boot option of ThinkPad Setup.
Please follow the instructions below to make sure the Legacy Only setting is not selected.

  1. Turn on computer.
  2. While "To interrupt normal startup, press Enter" message is displayed
    at lower-left area or lower-center of screen, press F1 key.
    ThinkPad Setup menu will be displayed. If password prompt appears,
    type correct password.
  3. Select Startup, then select UEFI/Legacy Boot.
  4. Make sure [Legacy Only] is not selected.
    If not selected, press Esc and then select Exit Discarding Changes to
    restart the computer.
    If selected, go to the step 5.
  5. Select [Both] and press Enter.
  6. Press the F10 key to save configuration and exit.
  7. Select Yes.
    The computer will be restarted automatically.

After the computer is restarted, insert the BIOS Update CD into the optical drive, and then restart the computer for the BIOS update.

Note: If the Legacy Only setting should be restored after the BIOS update, follow the instructions above, where, skip the step 4,
and select [Legacy Only] in the step 5.

Updating UEFI BIOS

Notes:.

  • (With the Hynix on-board memory installed:)
    If the UEFI BIOS has been updated to version 2.25 or higher, it is no longer able to roll back to the version before 2.25.
    (With the Samsung on-board memory installed:)
    If the UEFI BIOS has been updated to version 2.19 or higher, it is no longer able to roll back to the version before 2.19.
  • If the UEFI BIOS has been updated to version 2.10 or higher, it is no longer able to roll back to the version before 2.10 for Intel BIOS Guard supp
  • If your computer runs satisfactorily now, it may not be necessary to update the BIOS. To determine if you should update UEFI BIOS, refer to the Detremining which version installed section.
  • You need an AC adapter, a charged battery pack and any one of the following types of optical drives.
    • USB
  • Remove the Power-on password prior to updating the UEFI BIOS in the remote deployment environments.

Attention:
Do not turn off, suspend the computer or remove the BIOS UPDATE CD until the update has been completed. IF YOU DO THAT WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED.

Manual Update

 

  1. Firmly connect the AC adapter to the target computer.
  2. Make sure your ThinkPad computer has an optical drive installed.

[Windows 8.1/8]

  1. Turn on the computer to start Windows.
  2. Hold down the Windows logo key and press C to open the Charm bar on the screen.
  3. Select Settings, then Power from the menu.
  4. Select Reboot to restart the computer.

[Windows 7]

  1. Turn off the computer.
  2. Turn on the computer.
  3. Go to the step 7.
  1. While the "To interrupt normal startup, press Enter" message is displayed at the lower-left area or lower-center of the screen, press the F12 key. Boot Menu will be displayed. If a password prompt appears,type the correct password.
  2. Insert the BIOS Update CD into the optical drive.
  3. Select ATAPI CD0 or USB CD to set up the boot drive.
    ATAPI CD0: when using an Ultrabay Slim optical drive installed in the ThinkPad UltraBase
    USB CD: when using a USB optical drive Then, the computer will be rebooted from the BIOS Update CD.
  4. Select Read this first from the menu and carefully read the information.
  5. Press the Esc key to return to the menu.
  6. Select Update system program and follow the instructions on the screen.
  7. After the information panel appears, remove the BIOS Update CD from the
    optical drive then press the Enter key to restart the computer.
Initializing the UEFI BIOS

Note:
After initialization you may need to reapply some settings that you had changed previously.

UEFI BIOS Initialization is suggested for some problems. To initialize the UEFI BIOS settings:

[Windows 8.1/8]

  1. Turn on the computer to start Windows.
  2. Hold down the Windows logo key and press C to open the Charm bar on the screen.
  3. Select Settings, then Power from the menu.
  4. Select Reboot to restart the computer.

[Windows 7]

  1. Turn off the computer.
  2. Turn on the computer.
  3. Go to the step 7.
  1. While the "To interrupt normal startup, press Enter" message is displayed at the lower-left area or lower-center area of the screen, press the F1 key. The ThinkPad Setup menu will be displayed. If a password prompt appears, type the correct password.
  2. Press the F9 key to load default configuration.
  3. Select Yes.
  4. Press the F10 key to save default configuration and exit.
  5. Select Yes.
  6. Restart the computer.

Note:
After initialization you may need to reapply some settings that you had changed previously.

Determining Which Version is Installed

There are two ways to check the UEFI BIOS version and BIOS ID.

Checking on Windows

[Windows 8.1/8]

  1. Hold down the Windows logo key and press X to open a menu at the lower-left area of the screen.
  2. Select Control Panel from the menu.
  3. Make sure "View by Category" is selected, and select System and Security, select Administrative Tools, and then select System Information.
    -or-
  1. Select Run from the menu.
  2. Type msinfo32, and press Enter.
  1. On the System Information window, make sure System Summary is selected in the left side of the window.
  2. Locate the BIOS version/date line in the right side of the window. "LENOVO BIOS ID (BIOS version), date" will be shown.

[Windows 7]

  1. Click Start, click All Programs or Programs, click Accessories, click
    System Tools and then click System Information.
    - or -
    Click Start, type msinfo32in the Start Search box and then click msinfo32
    in the Programs list.
  2. On the System Information window, make sure System Summary is selected in
    the left side of the window.
  3. Locate the BIOS version/date line in the right side of the window.
    "LENOVO BIOS ID (BIOS version), date" will be shown.

 

If you are prompted for an administrator password or confirmation, type your password, or click Continue.

Checking on ThinkPad Setup

[Windows 8.1/8]

  1. Turn on the computer to start Windows.
  2. Hold down the Windows logo key and press C to open the Charm bar on the screen.
  3. Select Settings, then Power from the menu.
  4. Select Reboot to restart the computer.

[Windows 7]

  1. Power off the computer.
  2. Power on the computer.
  3. Go to the step 5.
  1. While the "To interrupt normal startup, press Enter" message is displayed at the lower-left area of the screen,
    press the F1 key. The ThinkPad Setup menu will be displayed. If a password prompt appears, type the correct password.
  2. Locate the UEFI BIOS Version line and Embedded Controller Version line.
    "UEFI BIOS version (BIOS ID)" will be shown on the UEFI BIOS Version line.
  3. Turn off the computer.

The following versions of UEFI BIOS and ECP (Embedded Controller Program) have been released to date.

Package UEFI BIOS
ECP
Release
2.25 2.25 (GJET75WW)   
1.09 (GJHT25WW) Current release
2.24 2.24 (GJET74WW)      
1.09 (GJHT25WW) gjuj11us.iso
gjuj11uc.txt
2.23 2.23  (GJET73WW)     
1.09  (GJHT25WW) gjuj10us.iso
gjuj10uc.txt
2.21 2.21  (GJET71WW)
1.09  (GJHT25WW) gjuj09us.iso
gjuj09uc.txt
2.19 2.19  (GJET69WW)     
1.09  (GJHT25WW) gjuj08us.iso
gjuj08uc.txt
2.17 2.17  (GJET67WW)     
1.09  (GJHT25WW) gjuj07us.iso
gjuj07uc.txt
2.14 2.14  (GJET64WW)
1.09  (GJHT25WW) gjuj06us.iso
gjuj06uc.txt
2.11 2.11  (GJET61WW)      
1.07  (GJHT23WW) gjuj05us.iso
gjuj05uc.txt
2.10 2.10  (GJET60WW)
1.07  (GJHT23WW) gjuj04us.iso
gjuj04uc.txt
1.10 1.10 (GJET34WW) 1.06 (GJHT22WW)
gjuj03us.iso
gjuj03uc.txt
1.09 1.09 (GJET33WW) 1.04 (GJHT20WW) gjuj02us.iso
gjuj02uc.txt

 

NomeOperating SystemVersãoLançamentoAdicionar à lista
de download
Fazer Download
Agora
BIOS Update Bootable CD
gjuj12us.iso
20.4 MB
2.2510 Apr 2014
README for BIOS Update Bootable CD
gjuj12uc.txt
23.9 KB
2.2510 Apr 2014


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Disponibilidade País
DisponívelWorldwide
ID do documento : DS035967
Atualizado : 10 Apr 2014
© 2013 Lenovo. Todos os direitos reservados.
   
SELECIONE TAREFA
 
Drivers e Programas  
Guias e Manuais  
Diagnóstico e Correção  
Garantia e Serviços  
Peças  
Acessórios  

RECURSOS DE Drivers
Indice de Ajuda
Matriz de Drivers
Drivers para Armazenamento Lenovo EMC
Drivers Recém Anunciados (RSS)
Atualize o Seu Equipamento THINK
Ferramentas ThinkVantage
CENTRAL DE SOLUÇÕES
Busca Assistida
Soluções Populares
Microsoft Solutions
Ferramenta de Auto-Diagnóstico
COMUNIDADE
Base de Conhecimento de Comunidades
Foruns de Comunidades
Lenovo Assisted Search