Print
login Conta
Search

Keyboard bezel assembly removal and installation - ThinkPad T430u

For access, remove these FRUs in order:

 

Removal steps of keyboard bezel - Please perform the following steps as shown in the pictures below.

Remove the rubber feet, and then remove the screws [1]. Then remove the screw [2] under the bottom cover and the screws [3] under the battery pack.

Step
Screw (quantity)
Color
Torque
[1] M2.5 × 6.5 mm, wafer-head, nylon-coated (2) Black 0.392 Nm (4.00 kgf-cm)
[2] M2 x 5 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm)
[3] M2 x 3 mm, flat-head (6) Silver 0.181 Nm (1.85 kgf-cm)

Turn the computer over to remove the screw [4] under the keyboard and the screw [5] in the wireless WAN card slot.

Step
Screw (quantity)
Color
Torque
[4] M2 × 6.0 mm, wafer-head (1) Silver 0.392 Nm (4.00 kgf-cm)
[5] M2 × 3.0 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgf-cm)

Detach the connectors as shown in the following illustration.

 

When installing: Ensure that the connectors are attached firmly.

Release the keyboard bezel from the frame using a plastic pry tool as shown in the following illustration.

 

When installing: Route the cables as shown in the following illustration before you attach the keyboard bezel.

 


  • Alias ID:
  • Document ID:PD025935
  • Last Updated :17/06/2014 22:47:15
  • (c) 2014 Lenovo