제품 정보를 입력하면, 맞춤형 서비스를 이용할 수 있습니다.
제품이 선택되지 않았습니다.제품을 선택하십시오.
Clear CMOS procedure - NetVista / ThinkCentre

Before proceeding, be sure to review the safety information.

NOTE:  Systems with Vpro / AMT, once the CMOS jumper has been moved over from pins 1&2, over to Pins 2&3, if the battery is removed while the power cord is unplugged from the power supply,

           all AMT setting will be cleared.

  1. Turn off the computer and any attached devices, such as printers, monitors, and external drives.
  2. Unplug all power cords from electrical outlets, and remove the cover.
  3. Locate the Clear CMOS/Recovery jumper on the system board.
  4. If necessary, remove any adapters that impede access to the Clear CMOS/Recovery jumper.
  5. Move the jumper from the standard position (pins 1 and 2) to pins 2 and 3.
  6. Replace any adapters that were removed.
  7. Replace the cover.
  8. Reconnect the power cords for the computer and monitor to electrical outlets.
  9. Restart the computer, leave it on for approximately 10 seconds.
  10. Turn off the computer by holding the power switch for approximately 5 seconds.
  11. Unplug the power cords from electrical outlets.
  12. Remove the cover.
  13. If necessary, remove any adapters that impede access to the Clear CMOS/Recovery jumper.
  14. Return the Clear CMOS/Recovery jumper to its original position.
  15. Replace any adapters that were removed.
  16. Replace the cover and reconnect any cables that were disconnected.
  17. Turn on the computer. The computer should sound 2 beeps. The time and date should need to be set. If not, the procedure did not work.
  18. After resetting the date, time, and saving the settings, exit the System Configuration Utility.

 



원하시는 내용을 찾을 수 없는 경우, 아래의 방법을 시도해 보십시오:
1. Lenovo 검색
2. 제품 사용 방법 및 일반적인 문제해결 방법
3. Lenovo 지원 포럼
4. 기술 지원 콜센터

국가 상태
사용 가능Worldwide
문서 자료 ID : HT036531
Legacy Document ID : MIGR-52235
마지막 업데이트 :
© 2013 Lenovo. All rights reserved.
   
작업을 선택하십시오.
 
드라이버 및 소프트웨어  
가이드 및 설명서  
진단 및 해결  
보증 및 서비스  
부품  
액세서리  

추가 자료
드라이버 목록
커뮤니티
커뮤니티 기술자료
커뮤니티 포럼
Windows 8 Support