제품 정보를 입력하면, 맞춤형 서비스를 이용할 수 있습니다.
제품이 선택되지 않았습니다.제품을 선택하십시오.
Considerations to deploy Intel Rapid Start Technology
Symptom

ThinkPads, with a Solid State Drive (SSD), include Intel Rapid Start Technology enabled within the Lenovo factory preload image.  If a custom image is deployed, some manual steps are needed to enable Intel Rapid Start Technology.

Affected configuration

The above symptom is associated with, but not limited to, the following systems:

  • T430, T430i, T430s, T430si, T530, T530i
  • W530
  • X230, X230i, X230 Tablet, X230i Tablet
  • L430, L530
  • Edge E330, E430, E530, S430

The system is configured with:

  • A Solid State Drive (SSD)

 

Applies to
  • Microsoft Windows 7

 

Additional Information

Power Manager refers to Intel Rapid Start Technology as "30 Day Standby".  The "30 Day Standby" uses a special Hibernation partition on the SSD to capture the contents of system memory.

The benefit is a longer battery life (compared to standard Sleep mode) and shorter resume time (compared to standard Hibernate mode).

To enable "30 Day Standby", the user will need to create a special Hibernation partition on the SSD and also to install Power Manager.

 

Solutions

To create the special Hibernation partition on the SSD:

-    The Hibernation partition must be at least the size as the installed memory (RAM).  For example, if the system has 8GB of RAM, then the Hibernation partition must be at least 8GB.

-    The Hibernation partition must be created with ID=0x84 (on a MBR disk) or ID=D3BFE2DE-3DAF-11DF-BA40-E3A556D89593 (on a GPT disk).  This ID must be specified during partition creation using DISKPART.

To install Power Manager:

Download and install Power Manager 6.32 or later at the following URL:

        http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-70601

When the Hibernation partition exists, Power Manager and ThinkPad BIOS will work together to automatically transition the system from standard Sleep mode to a low-power deep Sleep after three hours, except in the following conditions:

   - when the AC adapter is attached
   - when some device is attached to the always-on USB port and charging
   - when "30 Day Standby" is disabled in Power Manager (Advanced Mode -> Global Power Settings)

The three-hour transition time is not configurable.

 

     

 



원하시는 내용을 찾을 수 없는 경우, 아래의 방법을 시도해 보십시오:
1. Lenovo 검색
2. 제품 사용 방법 및 일반적인 문제해결 방법
3. Lenovo 지원 포럼
4. 기술 지원 콜센터

국가 상태
사용 가능Worldwide
가명 아이디 : SF12-T0046
문서 자료 ID : HT074526
Legacy Document ID : SF12-T0046
마지막 업데이트 :
© 2013 Lenovo. All rights reserved.
   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

추가 자료
도움말 인덱스
제품 사양 - PSREF
드라이버 목록
새로 배포된 드라이버 (RSS)
커뮤니티
커뮤니티 기술자료
커뮤니티 포럼
Windows 8 Support