제품 정보를 입력하면, 맞춤형 서비스를 이용할 수 있습니다.
제품이 선택되지 않았습니다.제품을 선택하십시오.
To enable functional key feature without pressing Fn on IdeaPad U300s, U300e and U400
Statement description

The hotkeys from F1 to F12 on IdeaPad U300s, U300e and U400 are designed to achieve a variety of features by default, and the appearance is also differentiated from traditional keyboard design. See Fig.1:

 

Fig.1

 

To press any of these hotkeys, you enable corresponding feature in a faster way noted in Fig.2.

 

 

Fig.2

 

But, when you want to enable one of the above functions, you need to press the combination of “Fn” together with specific hotkey. Is there a way to activate the feature by only pressing certain hotkey? And how to make it?

Affected configurations

The above symptom may occur on the following systems:

IdeaPad U300s

IdeaPad U300e

IdeaPad U400

 

Solution

Enter BIOS to disable “Hotkey Mode” under IdeaPad U300 series or “Hotkey Switch” under U400 to finish the setting modification:

1. Restart PC and press “Fn+F2” to enter BIOS upon Lenovo logo interface. If “Lenovo” logo doesn’t appear at bootup when restart PC, it means that fast boot is activated. In this case, shut down PC, press “OKR” button, select “Enter Setup”.

 

2. After enter BIOS, Select “Configuration” menu.

(1) For IdeaPad U300 series  , set “HotKey Mode” as “Disabled” and press F10 to save and exit. See Fig.3

 

 

Fig.3

 

(2) For IdeaPad U400, set “Hotkey Switch” as “Legacy Mode” and press F10 to save and exit. See Fig.4:

 

 

Fig.4



원하시는 내용을 찾을 수 없는 경우, 아래의 방법을 시도해 보십시오:
1. Lenovo 검색
2. 제품 사용 방법 및 일반적인 문제해결 방법
3. Lenovo 지원 포럼
4. 기술 지원 콜센터

국가 상태
사용 가능Worldwide
가명 아이디 : IN20120312-003
문서 자료 ID : HT072691
Legacy Document ID : IN20120312-003
마지막 업데이트 : 16 May 2014
© 2013 Lenovo. All rights reserved.
   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

추가 자료
도움말 인덱스
제품 사양 - PSREF
드라이버 목록
새로 배포된 드라이버 (RSS)
커뮤니티
커뮤니티 기술자료
커뮤니티 포럼
Windows 8 Support