제품 정보를 입력하면, 맞춤형 서비스를 이용할 수 있습니다.
제품이 선택되지 않았습니다.제품을 선택하십시오.
OneKey Recovery process does not work after disabling Windows System Restore. - Lenovo 3000 K100

SYMPTOM:

After disabling Windows System Restore on a Lenovo Windows Vista Preload, OneKey Recovery fails to complete the "CREATE ORIGINAL BACKUP" operation. This one-time backup operation of the preload stops executing and displays the following error message: "Insufficient space for backup! The backup operation cannot be performed!" As a result of this failure, all OneKey Recovery backup features are disabled.

AFFECTED CONFIGURATIONS:

The above symptom may occur on the following systems:

Lenovo 3000 K100

SOLUTION:

OneKey Recovery can fail to complete the backup operation if software was installed on the C:\ partition before "CREATE ORIGINAL BACKUP" was successfully completed. In order to solve this problem, remove the installed software from the C:\ partition, then access OneKey Recovery to perform "CREATE ORIGINAL BACKUP" again.

Removing Programs:

1. Click Start and then select Control Panel.

2. At the Control Panel, select Programs.

3. On Programs select Programs and Features.

4. Select Uninstall a Program

5. Choose the programs to uninstall and follow the instructions.

If removing the software does not solve this issue, follow the instructions below to reinstall the preload.

1. Insert LENOVO PRODUCT RECOVERY DVD in the drive.

2. Restart the system.

3. After POST, press any key when you see the onscreen message --> "PRESS ANY KEY TO BOOT FROM CD OR DVD". This time you would not have to create the hard drive partitions C:\ and D:\, because they have already been created

4. Install the Operating System on the C:\ partition. Windows might display a warning message indicating the C:\ partition could have files from a previous Windows installation. If that happens, press OK to continue

5. When the OS is installed, proceed to install the Drivers and Applications from the Lenovo Rescue System.

(1) Restart the system.

(2) Press the LVT or F2 key during POST when the LENOVO logo is displayed.

(3) At the Lenovo Rescue System, select Driver and Application Installation.

(4) Follow the instructions for Driver and Application Installation, which include restarting the system. The "Driver Application Installation" might display a warning message indicating the drivers have been installed already. If that is the case, click "Yes" to continue with the installation.

6. Once the Driver and Application Installation process is complete, the INTELLIGENT DEPLOYMENT window is displayed, along with other application windows.

(1) Click on the EXIT button of Intelligent Deployment.

(2) Another window is displayed from Intelligent Deployment asking to set the "User Account Management" to default value; just click on the Cancel button on this window.

7. Turn off WINDOWS SYSTEM RESTORE and "CREATE ORIGINAL BACKUP".

TRADEMARKS:

Lenovo and IdeaPad are trademarks of the Lenovo Corporation in the United States, other countries, or both.

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.

Other company, product, or service names may be trademarks or service marks of others.

 



원하시는 내용을 찾을 수 없는 경우, 아래의 방법을 시도해 보십시오:
1. Lenovo 검색
2. 제품 사용 방법 및 일반적인 문제해결 방법
3. Lenovo 지원 포럼
4. 기술 지원 콜센터

국가 상태
사용 가능Worldwide
가명 아이디 : ID20080530-003
문서 자료 ID : HT071495
Legacy Document ID : ID20080530-003
마지막 업데이트 : 30 Aug 2013
© 2013 Lenovo. All rights reserved.
   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

추가 자료
도움말 인덱스
제품 사양 - PSREF
드라이버 목록
새로 배포된 드라이버 (RSS)
커뮤니티
커뮤니티 기술자료
커뮤니티 포럼
Windows 8 Support