제품 정보를 입력하면, 맞춤형 서비스를 이용할 수 있습니다.
제품이 선택되지 않았습니다.제품을 선택하십시오.
No video after installing memory upgrade on ThinkCentre M58,M58p

 

Symptom

No video on display after installing memory upgrade.

Affected configurations

The above symptom may occur on the following systems:

  • ThinkCentre M58, M58p

Applies to

  • All Operating Systems
  • The System BIOS level is 5CKT66A or lower.
Solution

This symptom may occur when installing new generation DDR3 memory DIMMs and SODIMMs that use more address lines than was originally supported on the ThinkCentre M58, M58p.

Support for these newer generation memory DIMMs and SODIMMs has been added to system BIOS 5CKT67A and later levels.

Users who encounter this no video symptom should first remove the new memory they added, and try powering up the system to confirm that the system is working correctly with the original memory

Next, they should confirm that the memory DIMM upgrade module is supported on the ThinkCentre M58, M58p by referring to the Lenovo Desktop Memory Compatibility support page.

Click here to refer to the Lenovo Desktop Memory Compatibility support page.

Once the memory DIMM compatibility has been confirmed, users should upgrade the System BIOS to level 5CKT67A or later.

Finally, reinstall the memory upgrade and verify that the system now works correctly.

If updating the BIOS does not resolve the issue, users should contact Lenovo Support for additional problem determination assistance.



원하시는 내용을 찾을 수 없는 경우, 아래의 방법을 시도해 보십시오:
1. Lenovo 검색
2. 제품 사용 방법 및 일반적인 문제해결 방법
3. Lenovo 지원 포럼
4. 기술 지원 콜센터

국가 상태
사용 가능Worldwide
가명 아이디 : SF11-D0130
문서 자료 ID : HT052519
마지막 업데이트 :
© 2013 Lenovo. All rights reserved.
   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

추가 자료
도움말 인덱스
제품 사양 - PSREF
드라이버 목록
새로 배포된 드라이버 (RSS)
커뮤니티
커뮤니티 기술자료
커뮤니티 포럼
Windows 8 Support