2.5 inch SATA Hard Drive Firmware Update Utility (Bootable CD ISO) - ThinkPad

Operációs rendszer
Töltse le most!
2.5 inch SATA Hard Drive Firmware Update Utility
47.22 MB
Nem alkalmazható
README for 2.5 inch SATA Hard Drive Firmware Update Utility
19.24 KB
Nem alkalmazható

This utility will examine your system configuration and detect all 2.5 inch SATA Hard Drives (HDD) installed in your ThinkPad. SATA (Serial AT Attachment) is a new interface for storage devices.

The utility will then check the firmware revision of the hard drive and judge whether your system requires a firmware update or not. If required, it will prompt you to run the appropriate firmware update program for your drive.

This package is compiled into an ISO format, which is compatible with CD writing software such which supports and ISO format image file, and writable to a CD-R or a CD-RW disc.

A written CD-R or CD-RW disc will be bootable. It will boot from your ThinkPad Optical Disc Drive(*) and run the update utility program.

  • Your ThinkPad may need to change the boot device setting to boot from an Optical Disc Drive. (See the "Prepare boot device" section in this document)


  • This firmware update utility may not update a drive without a Lenvo part number(P/N), even its model is identical to a drive in the supported drive list. The drives with Lenovo part numbers include firmwares designed for using with the ThinkPad system.
Supported ThinkPad systems
Summary of Changes
Important Information
Supported hard drives
Making a CD-R or CD-RW disc to use
Installation Instructions
Prepare the boot device
Installation guide


Supported ThinkPad systems
  • ThinkPad E430, E431
  • ThinkPad E530, E531
  • ThinkPad L430
  • ThinkPad L530
  • ThinkPad T430
  • ThinkPad T530
  • ThinkPad T430s
  • ThinkPad W530
  • ThinkPad X230. X230 Tablet
  • ThinkPad Edge E420, E425
  • ThinkPad Edge E520, E525
  • ThinkPad T420, T520
  • ThinkPad T420s
  • ThinkPad W520
  • ThinkPad X220. X220 Tablet
  • ThinkPad L420, L520, L421
  • ThinkPad T410(i), T510(i)
  • ThinkPad T410s(i)
  • ThinkPad W510
  • ThinkPad W701, W701ds (See Important Information)
  • ThinkPad X201(i). X201s, X201 Tablet
  • ThinkPad SL410, SL510, L410, L510, L412, L512
  • ThinkPad R400, R500
  • ThinkPad T400, T500
  • ThinkPad T400s
  • ThinkPad W500
  • ThinkPad W700, W700ds (See Important Information)
  • ThinkPad X200, X200s, X200 Tablet
  • ThinkPad X300, X301
  • ThinkPad SL300, SL400, SL400c, SL500, SL500c
  • ThinkPad R60, R60e, R60i
  • ThinkPad R61, R61e, R61i
  • ThinkPad T60, T60p
  • ThinkPad T61, T61p
  • ThinkPad X60, X60s, X60 Tablet
  • ThinkPad X61, X61s, X61 Tablet
  • ThinkPad Reserve Edition
  • ThinkPad Z60m, Z60t
  • ThinkPad Z61e, Z61m, Z61p, Z61t
Summary of Changes

Release FWSH43

  • New
    • HGST
      • HTS725032A7E635OPAL  (Firmware 6B8Y0)

Release FWSH42

  • Seagate
    • ST***LT014-9YK14* (Firmware 0005LVM7)
    • ST***LT007-9ZV14* (Firmware 0005LVM1)
  • New
    • HGST
      • HTS725032A7E635OPAL  (Firmware 6B8M0)

Release FWSH41

  • HGST
    • HTS5450xxA7E380 (Firmware ZBC80)
  • New
    • Added support for following ThinkPad models
      • ThinkPad T430, T530
      • ThinkPad T430s
      • ThinkPad W530
      • ThinkPad X230. X230 Tablet

Release FWSH40

  • HGST
    • HTS7232xxA7A364 (Firmware ZB70W)
    • HTS723225A7A361FDE (Firmware LB70W)
    • HTS723225A7A365OPAL (Firmware 6B80P)
    • HTS5432xxA7A384 (Firmware ZB70V)
  • Seagate
    • Momentus 5400.6 (Firmware 0021LVM1)
    • Momentus Thin (Firmware 0005LVM7)
    • Momentus Thin (Firmware 0004LVM7)
  • New
    • Added support for following ThinkPad models
      • ThinkPad T410s(i)
      • ThinkPad T420, T520
      • ThinkPad T420s
      • ThinkPad T410(i), T510(i)
      • ThinkPad W510
      • ThinkPad W520
      • ThinkPad X220. X220 Tablet
      • ThinkPad X201(i). X201s, X201 Tablet

Release FWSH33

  • Seagate
    • Momentus 7200.4 (Firmware 0003LVM1)
    • Momentus 7200 FDE.2 (Firmware 0003LVM3)

Please refer to the README file under the "File details" section for a complete list of changes fixed by this driver update.


Important Information
  • The utility will not update an HDD installed in the Ultrabay using the Ultrabay HDD adapter.
  • ThinkPad W700, W700ds SATA HDD configuration should be 'Compatible'. Change SATA HDD in BIOS Setup/Config before update a firmware. Also note that restore this configuration after update, or an operating system won't start up and blue screen error may come up.
  • ThinkPad W700, W700ds The SATA Hard Drive Firmware Update Utility won't update a hard drive in the W700 Ultrabay with an adapter. Hard drives being updated firmwares should be in HDD0 or HDD1 bay.
  • A bootable CD type is changed from the floppy disc emulation to the hard disk emulation from FWSH20 release. Any file viewer software can not show the contents of the written CD-R/CD-RW disc.
  • The firmware update CD will not boot with UEFI mode. In case of this, change ThinkPad Setup/Startup, set "Both" in UEFI/Legacy Boot section
    and "Legacy First" in UEFI/Legacy Boot Priority section or "Legacy Only" in UEFI/Legacy Boot section.


Supported hard drives

This package provides firmware for the following Hard Drives.

Those drives are supported by ThinkPad models written in the first page of this document.


  • ("x" means a character, "|" shows new to this list.)
Toshiba MKxx32GSX
Fujitsu MHV2xxxBH
MHZ2xxxBJ G1
MHZ2xxxCJ G1



Momentus 7200.1
Momentus 5400.3
Momentus 5400 FDE.2
Momentus 7200.2
Momentus 5400.4
Momentus 7200.3
Momentus 7200 FDE.1
Momentus 5400.6
Momentus 7200.4
Momentus 7200 FDE.2
Momentus Thin




Making a CD-R or CD-RW disc to use

This section provides instructions for using RecordNow! to make a bootable CD. Please refer to a product manual when using other CD writing programs.

  1. Make sure you have a ThinkPad with a CD-RW, DVD/CD-RW combo or DVD multi drive installed. Prepare a blank CD-R or CD-RW disc.
  2. Start Windows Vista, XP, 2000 and logon with administrative privileges.
  3. Download the firmware update utility .ISO file.
  4. Run a CD writing software.
  5. Choose the downloaded ISO file in step 3 of this process to create your CD.
  6. Follow the instructions on the screen.



Prepare the boot device

The resulting CD-R or CD-RW disc includes an operating system and is bootable on the supported ThinkPad models.

The Hard Drive Firmware Update Utility bootable CD does not support USB Optical Disc Drives, PCMCIA/CardBUS Optical Disc Drives, Optical Disc Drives in a Docking Station bay, or any other drives other than the Optical Disc Drive in the ThinkPad UltraBay. Other drives will not be updated correctly by this firmware update utility.

Please confirm that an Optical Disc Drive is in the boot device list of your BIOS setup.

  1. Power off the ThinkPad, if it is turned on.
  2. Power on the ThinkPad.
  3. Press the F1 key to enter the BIOS Setup Utility when the "ThinkPad" logo is seen on the screen.
  4. Choose Startup from the menu.
  5. Choose Boot from the menu.
    Note: Please write down the current boot priority order for restoration later if you need to modify your boot list.
  6. In "Boot Priority Order", set ATAPI CD0 to the top of the list, 1.
  7. Press F10 to save the new setup.
  8. Power off or restart the system.



Installation Instructions


  • The update utility will not find a Hard Drive in a Docking Station In this case, please remove the drive and install it into a Hard Drive bay in your ThinkPad. If you encounter a problem installing a Hard Drive into your ThinkPad, please call your local Help Center.
  • The utility contains several executable files, but DO NOT RUN THESE PROGRAMS.
    Running these programs manually could ruin your drive.
  • The Hard Drive Firmware Update Utility does not support a suspend/hibernation/resume feature of the ThinkPad while the firmware update utility is running. Please do not use Fn-F4 or equivalent functions.
Installation guide

After the above sections Making a CD-R or CD-RW disc to use and Prepare the boot device have been completed, follow these steps. Please connect the AC adapter and use a fully charged battery to power the ThinkPad system during the update. This will avoid an accidental lost of power.

Important Notice: Please remove the hard drive password. Otherwise the firmware can't be updated and an error message will be displayed.

Attention: Do not power off the ThinkPad system during the firmware update process or your hard drive may NOT be usable anymore.

Note: Install only one hard drive into your ThinkPad.

  1. Place the CD-R or CD-RW disc you created in Making a CD-R or CD-RW disc to use section into your ThinkPad optical disc drive.
  2. Boot the system with the firmware update utility.
  3. Drives that have been detected will be listed in the upper area of the Main Menu.
    • A blinking mark to the left of the drive listed indicates that an update is required.
    • No blinking mark to the left of the drive listed indicates that the hard drive has latest firmware and there is no need to update, or the firmware update is not for valid for your drive. Remove the firmware update utility and shutdown your ThinkPad.
  4. Follow the instructions on the screen to update the necessary drives.
  5. When the installation is complete, remove the firmware update utility CD or CD-RW from the optical disc drive and power off your ThinkPad system.

    Note: Do not restart the ThinkPad system using the Ctrl-Alt-Delete keys.
  6. Enter BIOS Setup Utility again, if you need to restore your original boot order and/or a hard drive password.

  • Alias ID: MIGR-63685, MIGR-63685-KR
  • Document ID:DS003740
  • Last Updated :23 Jun 2014
  • © 2015 Lenovo