|Monitor Size||19.0 inch (483 mm)|
|Optimum Resolution||1280 x 1024|
|Maximum Resolution||1280 x 1024|
|Video input||VGA Analog, DVI-D Digital|
|Pixel pitch||0.294 mm|
|Brightness (typical)||250 cd/m2|
|Contrast ratio (typical)||800 : 1|
|Viewing angle (typical)||Horizontal: 160 degrees (at 10:1 contrast ratio); 170 degrees (at 5:1 contrast ratio)|
| ||Vertical: 160 degrees (at 10:1 contrast ratio); 170 degrees (at 5:1 contrast ratio)|
|Response time (typical)||5 ms|
|Viewable area height||301 mm|
|Viewable area width||376 mm|
|Signal cable - 15-pin D||1.8 m|
|Signal cable - DVI-D||1.8 m|
|SYNC Type||Separate TTL|
|SYNC on Green||No|
|Bezel width (Side)||14.8 mm|
|Tilt||4 degrees forward|
|30 degrees backward|
|Soundbar Attachment||ThinkVision USB Soundbar (40Y7616)|
|Kensington Security Lock Slot (www.lenovo.com/support/security)||Yes|
|Preset display modes||21|
|User defined display modes||17|
|VESA DDC capable||2B/CI|
|ISO 13406-Part 2 capable||Yes|
|Power management capable||Yes - VESA DPMS|
|Power supply||Universal Voltage (100 to 240 VAC)|
|Power cord - detached||1.8 meter|
|FCC B compliance||Yes|
|TCO'03 Environmental Label||Yes|
|EU Directive 2002/95/EC (RoHS)||Yes|
|EU Directive 2002/96/EC (WEEE)||Yes|
|Width||16.06 inch (408.0 mm)||19.29 inch (490 mm)|
|Depth||7.03 inch (178.6 mm)||6.81 inch (173 mm)|
|Height||16.42 inch (417.0mm)||16.69 inch (424 mm)|
|Weight||12.13 lb (5.50 kg)||15.21 lb (6.9 kg)|
|Weight - without tilt stand||9.26 lb (4.20 kg)||- - - - - - - - - -|
- Input voltage: 100 to 240 V ac
- Frequency: 50/60 Hz
- Power consumption:
- Maximum: 24 watts
- Normal use: 17 watts typical*
- Standby: <1 watts
- Suspend: <1 watts
- Off: <0.5 watt
- Maximum earth leakage current:
- < 3.5 mA at 264 V
- < 0.25 mA at 100 V
* Typical power consumption is tested EPA4.1 method
|Operating||0 to 40 deg.C||10 to 80 %||0 to 12,000 ft (3,657 m)|
|Shipping||-20 to 60 deg. C||5 to 95 %||0 to 40,000 ft (12,200 m)|
|Storage||-20 to 60 deg. C||5 to 95 %||0 to 12,000 ft (12,200 m)|
Declared acoustical noise emissions LWAU = 4.5 bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779.
- One monitor
- Attached tilt stand
- Attached 1.8 meter (5.9-feet) analog video signal cable (15-pin D to 15-pin D)
- Attached 1.8 meter (5.9-feet) digital video signal cable
- Power cord
- A CD containing multilingual user's guide, set-up test pattern, and .INF file
- Setup poster
- Safety and warranty information
Note: With the exception of the models for U.S., Canada, and Japan, the power cords (based on the country order code) are supplied by distribution centers.
Three years - Customer Carry-in or Mail-in using Rapid Replacement Service
- Announce date: 11 Nov 2008 (Worldwide)
- Planned availability date: 14 Nov 2008 (Worldwide)
The display is intended to operate with system units or video adapters that generate a video output signal falling within the following specification:
|Maximum Resolution||1280 x 1024 pixels|
|Optimum Resolution||1280 x 1024 pixels|
|Maximum pixel rate||140 Mhz|
The monitor supports VESA Standard Timings as detailed in "Display Monitor Timing Specification," Version 1.0, Revision 0.8, dated September 17, 1998, for the following modes:
- VGA: 640 x 480 at 60, 72, and 75 Hz
- SVGA: 800 x 600 at 60, 72, and 75 Hz
- XGA: 1024 x 768 at 60, 70, and 75 Hz
- SXGA: 1280 x 1024 at 60, 70, 72 and 75 Hz
This monitor also supports the following modes:
- 640 x 350 at 70 Hz
- 640 x 480 at 66 Hz
- 720 x 400 at 70 Hz
- 1280 x 1024 at 76 Hz
Note: National language support is a function of the video adapter in the system unit and the application or support software.
* This is the optimum display mode for the best displayed image. Reduced image quality may result if used in other modes due to the image scaling limitations of LCD monitor technology.
(H x V Pixels)
|Incoming video refresh rate|
|640 x 350||70 Hz|
|640 x 480||60 Hz|
|720 x 400||70 Hz|
|800 x 600||60 Hz|
|1024 x 768||60 Hz|
|1280 x 1024||60 Hz NI* (Optimum Display Mode)|
The factory-preset modes cannot be overwritten, but can be adjusted to personal choice. The new settings are stored automatically in one of the user locations and are recalled each time that mode is used. The factory settings for the mode in use, if any, can be restored by operating the reset control.
Information about the current incoming display mode is shown in the on-screen displays. However, it is displayed at the LCD panel's optimum refresh rate of 60 Hz.
It may be necessary to make some adjustments to the displayed image to compensate for variations in video signal timings. The user controls can be used to make these adjustments.
The Topseller Lenovo L1900 monitor (6135-HE1) is supplied with detachable 1.8-meter analog video signal cable.
This monitor has been tested with ThinkPad and ThinkCentre systems and is compatible with systems and graphics adapters which comply with the relevant parts of "VESA and industry standards and guidelines for computer display monitor timing" Version 1.0 Revision 0.8, adopted September 17, 1998. Supported display modes and number of colors are a function of the attaching system unit. The full range of display modes, refresh rates, and number of colors available with this monitor may not be available or supported with all combinations of system units, their operating systems, and application software. Implementation of monitor plug and play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective.
- Microsoft Windows Vista
- Microsoft Windows XP
- Microsoft Windows 2000
- TCO'03 Environmental Label
- ISO/DIS 13406 Part 2
- Software: Microsoft 2000/XP/Vista
- EU Directive 2002/96/EC - WEEE
- EU Directive 2002/95/EC - RoHS
UL (U.S.), CSA (Canada), IEC950 CB Report, NEMKO (Norway), SEMKO, DEMKO (Denmark), FIMKO (Finland), TUV (Germany), TUV-S (Argentina), CCC (China), NOM (Mexico), SASO (Saudi Arabia), GOST (Russia), PSB (Singapore), Green Mark (Taiwan), JEITA (Japan), FCC B (U.S.), IC (Canada), CE (Europe), MIC (Korea), VCCI Class B (Japan), BSMI (Taiwan), South Africa, Australia, New Zealand, Jordon
- Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards, and application software.
- Horizontal- and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
- Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
- The number of colors shown in any display mode (up to a maximum of 16.7 million) is not limited by the monitor, but depends on the capabilities of the video adapter in the system unit.
- This monitor provides FCC class B - residential installation - compliance in all display modes.
- Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter.
- Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug and Play to be effective.
- Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.
- A 19.0-inch TFT monitor has nearly 4.0 million subpixel transistors laid over an area exceeding 175 square inches. Cost-effective manufacturing processes introduce a small number of defective subpixel transistors. This monitor meets the ISO 13406-2 Class II Pixel Defect follows:
- The Auto-Setup "test pattern" can be used with Windows 3.1, Windows NT 3.5, Windows NT 4.0, Windows 95, Windows 98, Windows 2000, Windows XP, and DOS 7.0 only.