Beep and no beep symptoms - 3000 N100, N200, V100, V200

Other error messages, codes, or symptoms

	Error messages
	Numeric error codes
	Intermittent and undetermined problems
	LCD related symptoms

If you are unable to find your particular symptom or error, please refer to Need more help?

Beep symptoms

Symptom or error	Service part or action, in sequence
One beep and a blank, unreadable, or flashing LCD.	Reseat the LCD connector LCD assembly External CRT System board
One long and two short beeps, and a blank or unreadable LCD.	System board LCD assembly DIMM
Two short beeps with error codes.	POST error. See Numeric error codes for more help.
Two short beeps and a blank screen.	System board DIMM
Three short beeps, pause, three more short beeps, and one short beep.	DIMM System board
One short beep, pause, three short beeps, pause, three more short beeps, and one short beep.	DIMM System board
Only a cursor appears.	Reinstall the operating system
Four cycles of four short beeps and a blank screen.	System board (Security chip)
Five short beeps and a blank screen.	System board

No beep symptoms

Symptom or error	Service part or action, in sequence
No beep, power-on indicator on, LCD blank, and no POST.	Make sure every connector is connected tightly and correctly DIMM System board
No beep, power-on indicator on, and LCD blank during POST.	Reseat DIMM System board
The power-on password prompt appears.	A power-on password or a supervisor password is set. Type the password and press Enter.
The hard drive password prompt appears.	A hard drive password is set. Type the password and press Enter.

Need more help?

Please select one of the the following options for further assistance:

	How to access the BIOS - 3000 Family notebooks
	Service parts list index - 3000 Family notebooks
	Troubleshooting
	Submit a technical question
	Contact your local technical Support Center

País de disponibilidad
Disponible	Worldwide

Documento de identidad : HT004373
Legacy Document ID : MIGR-67884
Última actualización :