Cuéntenos sobre su producto y personalizaremos el soporte.
Ningún Producto Ha Sido SeleccionadoSeleccionar Producto
Atmel Touch Debug Port Driver for Windows 8 (32-bit) - ThinkPad Tablet 2
NombreOperating SystemVersiónLanzamientoAgregar a la lista
de descargas
Descargar
ahora
Atmel Touch Debug Port Driver
gagx02ww.exe
316 KB
6.2.9200.1638429 Nov 2012
README for Atmel Touch Debug Port Driver
gagx02ww.txt
6 KB
6.2.9200.1638429 Nov 2012

This package installs the software (Atmel Touch Debug Port Driver) to enable the following device.

  • maxTouch I2C Boot Bridge Peripheral Driver

Refer to marketing materials to find out what computer models support which devices.

If this package has been installed, updating (overwrite-installing) this package will fix problems, add new functions, or expand functions as noted below.

This program is language independent and can be used with any language system.

 

Contents
Supported ThinkPad System
Supported Operating System
Summary of Changes
Installation Instruction
Determining Which Version is Installed

 

Supported ThinkPad System
  • ThinkPad Tablet 2

 

Supported Operating System
  • Microsoft Windows 8 32-bit.

 

Summary of Changes

Where:

  • [Important] Important update
  • (New) New function or enhancement
  • (Fix) Correction to existing function

Version 6.2.9200.16384

  • (New) Initial release for ThinkPad Tablet 2.

 

Installation Instruction

Note:

  • If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Version Information section.
Manual Install

This section assumes to use Internet Explorer and Explorer.

[Downloading file]

  1. Click once on the underlined file name with the left mouse button. Once this is done, a pop-up window will appear.
  2. Follow the instructions on the screen.
  3. In the window to choose Run or Save, click Save.
  4. Choose the folder you would like to download the file to and click Save.
    A different window will appear and the download will begin and complete.
    Once the download has completed, there may or may not be a message stating that the download completed successfully.

[Extracting file]

  1. Make sure to be logged on with administrative privileges.
  2. Locate the directory where the file was downloaded.
  3. Locate the file that was downloaded and double-click it.
  4. Follow the instructions on the screen.
  5. In the "Select Destination Location" window, click Next. If you would like to select a different folder, click Browse.
  6. In the "Ready to Install" window, click Install. All the necessary files will be extracted to the folder selected in the step 10.

 

Clean Install
  1. Press the Windows logo button to display the Start screen.
  2. Swipe in from the bottom edge of the touchscreen to display the App bar.
  3. Select All apps.
  4. Select Control Panel.
  5. Select System and Security.
  6. Select Device Manager in the System section.
  7. Double-tap the Other devices category.
  8. Double-tap on the item with HW ID "VEN_ATML&DEV_2000".
  9. Select the Driver tab, then select Update Driver...
  10. Select Browse my computer for driver software.
  11. Select Browse..., then select the driver location, and then select OK, then select Next.
  12. Select Close when the installation has completed.
Update Install

To update the driver, follow the instructions below:

  1. Press the Windows logo button to display the Start screen.
  2. Swipe in from the bottom edge of the touchscreen to display the App bar.
  3. Select All apps.
  4. Select Control Panel.
  5. Select System and Security.
  6. Select Device Manager in the System section.
  7. Double-tap the Hardware Patch Driver Class category.
  8. Double-tap maxTouch I2C Boot Bridge Peripheral Driver.
  9. Select the Driver tab, then select Update Driver...
  10. Select Browse my computer for driver software.
  11. Select Browse..., then select the driver location, and then select OK, then select Next.
  12. Select Close when the installation has completed.
Determining Which Version is Installed
  1. Press the Windows logo button to display the Start screen.
  2. Swipe in from the bottom edge of the touchscreen to display the App bar.
  3. Select All apps.
  4. Select Control Panel.
  5. Select System and Security.
  6. Select Device Manager in the System section.
  7. Double-tap the Hardware Patch Driver Class category.
  8. Double-tap maxTouch I2C Boot Bridge Peripheral Driver.
  9. Select the Driver tab, then the driver version will be displayed.

 

 



If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

País de disponibilidad
DisponibleWorldwide
Documento de identidad : DS033191
Última actualización :
© 2013 Lenovo. Todos los derechos reservados.
   
Seleccione Tarea
 
Controladores Y Software  
Guías Y Manuales  
Diagnosticar Y Reparar  
Garantía Y Servicios  
Partes  
Accesorios  

RECURSOS ADICIONALES
Driver Matrix
COMUNIDAD
Artículos destacados de Knowledge Base
Centro de Respuestas de la Comunidad de Lenovo
Foros Comunidad de Lenovo
Lenovo Assisted Search