ThinkVision L2250p monitor may not wake or become unresponsive after going into Standby mode - ThinkCentre M58, M58p

The ThinkVision L2250p monitor, when connected to a ThinkCentre M58/M58p via VGA or DisplayPort using a DisplayPort to DVI cable, may not wake up or
may lock up when running Microsoft Windows XP SP3 with Power Manager installed.  The user may need to remove the power from the display and plug it
back in and/or reboot the system to be able to view the video again.

Affected configurations

The above symptom is associated with, but not limited to, the following systems:

  • ThinkCentre M58, M58p

Applies To:

  • Microsoft Windows XP Professional

None.  Do not replace any hardware for this issue.


In Power Manager, the user should uncheck the Screen Lock and Screen Saver options under the Dynamic Brightness Control section, on the Global Power Settings tab,
as seen in the screen shot below.


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

País de disponibilidad
Alias ID : SF12-D0094
Documento de identidad : HT073056
Legacy Document ID : SF12-D0094
Última actualización :
© 2013 Lenovo. Todos los derechos reservados.
Seleccione Tarea
Controladores Y Software  
Guías Y Manuales  
Diagnosticar Y Reparar  
Garantía Y Servicios  

Driver Matrix
Artículos destacados de Knowledge Base
Centro de Respuestas de la Comunidad de Lenovo
Foros Comunidad de Lenovo
Lenovo Assisted Search