No video after installing memory upgrade on ThinkCentre M58,M58p



No video on display after installing memory upgrade.

Affected configurations

The above symptom may occur on the following systems:

  • ThinkCentre M58, M58p

Applies to

  • All Operating Systems
  • The System BIOS level is 5CKT66A or lower.

This symptom may occur when installing new generation DDR3 memory DIMMs and SODIMMs that use more address lines than was originally supported on the ThinkCentre M58, M58p.

Support for these newer generation memory DIMMs and SODIMMs has been added to system BIOS 5CKT67A and later levels.

Users who encounter this no video symptom should first remove the new memory they added, and try powering up the system to confirm that the system is working correctly with the original memory

Next, they should confirm that the memory DIMM upgrade module is supported on the ThinkCentre M58, M58p by referring to the Lenovo Desktop Memory Compatibility support page.

Click here to refer to the Lenovo Desktop Memory Compatibility support page.

Once the memory DIMM compatibility has been confirmed, users should upgrade the System BIOS to level 5CKT67A or later.

Finally, reinstall the memory upgrade and verify that the system now works correctly.

If updating the BIOS does not resolve the issue, users should contact Lenovo Support for additional problem determination assistance.

If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

País de disponibilidad
Alias ID : SF11-D0130
Documento de identidad : HT052519
Última actualización :
© 2013 Lenovo. Todos los derechos reservados.
Seleccione Tarea
Controladores Y Software  
Guías Y Manuales  
Diagnosticar Y Reparar  
Garantía Y Servicios  

Driver Matrix
Artículos destacados de Knowledge Base
Centro de Respuestas de la Comunidad de Lenovo
Foros Comunidad de Lenovo
Lenovo Assisted Search