M58's has an "Intel(R) AMT" menu in BIOS Setup Utility.


Applicable Countries/Regions
Worldwide
Service Hints & Tips
Symptom

M58 (non-vPro) models, has an "Intel(R) AMT" menu in the BIOS Setup Utility. Both M58p (vPro) and M58 (non-vPro) have an AMT menu in the BIOS Setup, which is different from the M57p and M57.

Affected configurations

The above symptom may occur on the following systems:

  • ThinkCentre M58 (type 6139, 6175, 6239, 6258, 6302, 6303, 7174, 7244, 7348, 7354, 7355, 7360, 7373, 7626, 7627, 7628, 7637, 7638, 7639, 7187, 7359, 8820, 8910, 9960)
  • ThinkCentre M58p (type 6136, 6137, 6138, 6209, 6234, 7188, 7220, 7346, 7347, 7356, 7357, 7358, 7484, 7629, 7635, 8338, 9964, 9965, 7345, 7479, 7483, 7630, 9961)

Additional Information:

Intel Management Engine (ME) Firmware will provide different functions automatically according to the CPU on the system:

- M58p (vPro model), which use vPro CPU, ME will provide AMT 5.0 function.

- M58 (non-vPro model), which use non-vPro CPU, ME will provide Intel Standard Manageability.

The function of Intel Standard Manageability is similar with AMT 3.2, which needs an AMT menu in BIOS to configure.

Intel(R) AMT menu shows as below:

AMT

The function of the settings:

Items Description Default
Intel (R) AMT To Enable/Disable Intel AMT. If AMT disabled: 1.hide the CTRL-P prompt so there would not be any method to provision iAMT 2.would not look for setup.bin on a USB key so the MEBX will not be provisioned 3.BIOS issue an unprovision. At next boot, an unprovision prompt will be shown after POST. 4.Disable SOL/IDER Enable
MEBx Reset To reset AMT configuration to factory settings without entering MEBx Disable
Press CTRL-P to enter MEBx User can or can not enter MEBx by pressing CTRL-P Enable
Intel (R) AMT SKU Intel ME FW SKU AMT+ QST+ ASF2 ( Show only)
ME Firmware Version Intel ME FW version
COM Port Address If SOL enabled, the SOL Configuration will be shown. SOL: Serial Over LAN, a feature of AMT. SOL
Console Type Console Type of SOL COM port VT100+
Continue C.R. after POST Enable Console Redirection after OS has loaded On

Solution

None. Do not replaced any hardware for this issue.

This is working as designed and expected behavior.




If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

País de disponibilidad
DisponibleWorldwide
Documento de identidad : HT052092
Legacy Document ID : SF09-D0013
Última actualización :
© 2013 Lenovo. Todos los derechos reservados.
   
Seleccione Tarea
 
Controladores Y Software  
Guías Y Manuales  
Diagnosticar Y Reparar  
Garantía Y Servicios  
Partes  
Accesorios  

RECURSOS ADICIONALES
Driver Matrix
COMUNIDAD
Artículos destacados de Knowledge Base
Centro de Respuestas de la Comunidad de Lenovo
Foros Comunidad de Lenovo
Lenovo Assisted Search