Removing the computer cover - ThinkCentre M90z

CAUTION:
caution
The microprocessor and heat sink assembly might be very hot. Turn off the computer and wait three to five minutes to let the computer cool before opening the computer cover.

This section provides instructions on how to remove the computer cover.

To remove the computer cover, do the following:

  1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.
  2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay it down so that the screen is against the surface and the cover is facing up.
  3. Remove any locking device that secures the computer cover, such as an integrated cable lock. See Integrated cable lock.
  4. Press the two cover-release buttons on the computer cover as shown, slide the computer cover toward the top of the computer, and then lift the computer cover up to remove it from the chassis.

Removing the computer cover

 



If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

País de disponibilidad
DisponibleWorldwide
Documento de identidad : HT035834
Legacy Document ID : MIGR-75291
Última actualización :
© 2013 Lenovo. Todos los derechos reservados.
   
Seleccione Tarea
 
Controladores Y Software  
Guías Y Manuales  
Diagnosticar Y Reparar  
Garantía Y Servicios  
Partes  
Accesorios  

RECURSOS ADICIONALES
Driver Matrix
COMUNIDAD
Artículos destacados de Knowledge Base
Centro de Respuestas de la Comunidad de Lenovo
Foros Comunidad de Lenovo
Lenovo Assisted Search