Cannot completely disable Intel® Active Management Technology DHCP feature when disabling AMT in BIOS - ThinkCentre M58, M58p

For the M58/M58p machine, the AMT by default will enable DHCP, so that before it boots up into the operating system, it will get an IP address from the DHCP server. When disabling AMT in system BIOS cannot completely disable the AMT DHCP features.

Affected configurations

Any of the following systems but not limited to the following systems:

  • ThinkCentre M58 (all models)
  • ThinkCentre M58p (all models)

Applies to:

  • All Operating Systems

The user must enter the AMT (press Ctrl p) to disable the DHCP first, then disable the AMT in BIOS.

Click here to view the instructions


Completely disable AMT - The only way to do this is physically sit at the PC, go into the AMT menu and set the AMT options to "none". There is no way to do this remotely because of AMT security considerations.

If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

País de disponibilidad
Documento de identidad : HT002445
Legacy Document ID : SF10-D0098
Última actualización :
© 2013 Lenovo. Todos los derechos reservados.
Seleccione Tarea
Controladores Y Software  
Guías Y Manuales  
Diagnosticar Y Reparar  
Garantía Y Servicios  

Driver Matrix
Artículos destacados de Knowledge Base
Centro de Respuestas de la Comunidad de Lenovo
Foros Comunidad de Lenovo
Lenovo Assisted Search